Print or Download PDF

Description

Standards of reference and applications

Indoor LAN horizontal cabling (max. 90m)
EIA/TIA 568-C.2,ISO/IEC 11801, IEC60794

Installation Features

Store at: -0 to +50 °C
Install at: -0 to +50 °C.       Bending radius minimum: 80 mm (diam. 160 mm).   Pull maximum: 100 N.
Operate at: -20 to +60 °C.  Bending radius minimum: 125 mm (diam 250 mm).

Design

(Cat.6 U/UTP)
Conductor: solid bare copper AWG23 (0.55 mm nom.)
Insulation: polyethylene Ø 1.00 mm (nom.)
Pair: 2 insulated conductors stranded together
Central cross: 4 pairs assembled together around a PE central cross
Outer Jacket: grey, fire retardant LSZH
Color code:
1.White – White/blue
2.White – White/orange
3. White – White/green
4. White – White/brown

(4xSMT OS2)
Optic fiber: single mode OS2
Secondary coating: tight 900 μm, dyed
Structure: 4 fibers per revolution
Pulling element: aramid fibers
Outer Jacket: yellow/grey, fire retardant LSZH (nom. Ø 4,5/6,5mm)
Color code: 1. Blue, 2. White, 3. Yellow, 4. Green

Outer diameter: 6,5 x 14,1 mm (nom.)
Marking: APS – SCA34642A0CCA – CAT.6 U/UTP 4 PR AWG 23/1 + 4xSMT OS2 – LSZH Cca – Hybrid Cable – lot no. – w/y – xxx m

Environmental properties and Fire Performances

CPR Class: Cca-S1b,do,a3 (B2ca-S1b,do,a3)
Declaration of Performance: SCA34642A0CCA-001
Flame retardant: IEC60332-1, IEC60332-3
RoHS: 2011/65/EU
REACH: EC 1907/2006

Electrical characteristics

(CAT.6 U/UTP)
Conductor resistance: ≤ 95 Ω/km
Insulation resistance: ≥ 5000 MOhm/km
Mutual capacitance: ≤ 56 pF/m 
Capacitance unbalance pair/pair: ≤ 330 pF/100m
Average characteristic impedance: 100 ± 15 Ω @ 1-250MHz
Velocity of propagation (NVP): 69%
Voltage (max): 75V (DC)

(4xSMT OS2)
Attenuation: ≤ 0,4 @1310 nm (dB/km), ≤ 0,3 @1550 nm
Mode field diameter: 9,2 ± 0,4 μm @1310 nm, 10.4±0.5 μm @1550 nm
Cladding non-circularity:  ≤ 0,7 %
Cladding diameter: 124,8 ± 0,7 μm
Cladding non-circularity ??: ≤ 1 %
Coating diameter: 245 ± 5 μm

Ordering and delivery information

Recommended connectivity

Extended system warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.
Read more.

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.