SCS6AS Cat.6A Patchcords Screened F/UTP 4 pairs PVC

Category 6A, Patchcords, F/UTP Screened, 4 pairs, SCS6AS, Indoor.
PCMJ6Fxxc, Rev.00, Date 2017-05-22

Print or Download PDF


Standards of reference and applications

EIA/TIA 568-C.2, ISO/IEC 11801, EN 50288-10, IEC 61156‐5, EN 50173-1
Gigabit Ethernet 10GBASE-T, Fast Ethernet 100 BASE-T, Fast Ethernet 100 BASE-TX, Ethernet 10 BASE-T, 155 Mbit ATM, 625 Mbit ATM, 1.2 Gbit ATM


Product Features

Category 6A Compliant, 500MHz
Backward Compatible
Choice of Colours
T568B wiring
Moulded strain relief boot with clip protector
Individually bagged


Installation Features

Store at  -0 to +60 °C
Install at  -0 to +50 °C
Operate at : -10 to +65 °C
Durability : > 700 Cycles (in/out)



Cable conductor : stranded bare copper AWG26 /7×0.16mm)
Cable insulation : HDPE 0.98mm ± 0.06mm
Cable shield : overall aluminium foil with drain wire 7×0.16mm
Cable outer jacket : PVC material, nominal diameter 5.8mm
Cable marking : APS Finland – Category 6 F/UTP 4 pairs 26AWG Patch Cable  – 100Ohm — ISO/IEC 11801 TIA/EIA-568C.2-1 UL LISTED – m
Type of connector (end A) : PC Plug RJ45 8(8) screened, phosphor bronze contacts, gold plating.

Type of connector (end B) : PC Plug RJ45 8(8) screened, phosphor bronze contacts, gold plating.
Type of boot (end A) : moulded
Type of boot (end B) : moulded

Environmental properties and Fire Performances

Flame retardant :  IEC60332-1


Electrical characteristics

Dielectric strength : 1000V for 3 seconds
Voltage : 150V
Current : 
Contact resistance :
≤ 20mΩ
Typical resistance unbalance : 2%
Insulation Resistance : min. 150 MΩ/km


Ordering and delivery information

PCMJ6Fxxc1 pc/bag

xx = meter length (ex. 0,5m = 05; 1m = 1; 2m = 2; 10m = 10; …)
c = colours = Red (RD), Blue (BU), Black (BK), Green (GN), Yellow(YW), White (WT), Violet (VT), Orange (OR), Pink (PK).


Recommended connectivity

Horizontal cable : DCC6AFTP4PV, DCC6AFTP4PH, DCC6AFTP4PE
Keystone jack :
Panel : PPE24SU
Faceplate : FP86150S245, FP86171S245


Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.



Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.