Select Page

Category 6A screened cabling system

Tele & Data

Connectivity Solutions for Telecommunication & Data Networks

SCS6AS Cat.6A cable U/FTP 4 pairs AWG23/1 LSZH Indoor (Dca)

Category 6A, U/FTP Screened, 4 pairs, LSZH, SCS6AS, Indoor.
DCC6AFTP4PH-500, Rev.01, Date 2020-09-01

Description



Standards of reference and applications

LAN Horizontal Wiring
IEEE 802.3 : Ethernet 10Base-T, Fast Ethernet 100Base-T, Gigabit Ethernet 1000Base-T, 10GBase-T
IEEE 802.5 : ISDN, FDDI, ATM, Cable sharing
IEEE 802.3at Power over Ethernet (PoE), IEEE 802.3at Power over Ethernet Plus (PoE+)
EN 50288-5-1, EN 50288-10-1, EN 50173, EN 50174-2, ISO/IEC 11801 2., IEC 61156-5, TIA/EIA-568-B.2-10,
UL Subject 444

 

Installation Features

Store at  -0 to +50 °C
Install at  -0 to +50 °C
Operate at : -20 to +60 °C
Bend minimum during installation: 53 mm
Bend minimum fixed: 26 mm
Pull maximum : 100 N
Fire load: 0.160 kWh/m

 

Design

Conductor : solid bare copper AWG23 0.565 mm (+0.008/-0.01 mm)
Insulation : polyethylene 1.32 ± 0.02 mm
Pair : 2 insulated conductors stranded together
Assembling : no 4 pairs assembled together around a PE central cross
Wrapping :  polyester tape
Screen :  aluminium foil
Outer jacket : grey LSZH material
Marking : APS Finland – ww/yy U/FTP 4x2x23AWG LSZH Category 6A Extended Frequency 500 MHz 100Ohm – ISO/IEC 11801 – meter marking.

Colour code 

  1. Blue, White/blue
  2. Orange, White/orange
  3. Green, White/green
  4. Brown, White/brown

 

Environmental properties and Fire Performances

CPR Class : Dca-s2-d2-a2
Declaration of Performance : DCC6AFTP4PH-001
Degree of acidity of gases :
IEC 60754-1/2

Halogen acid gas : IEC 60754-1/2 (Halogen acid gas emission ≤ 0.5 %)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60 %)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-24 Cat.C
RoHS : 2011/95/EU

 

Electrical characteristics

Resistance of the conductor @ 20°C : ≤ 73.2 Ω/km
Insulation resistance: ≥ 5 GOhm/km @ +20°C

Mutual Capacitance : 56 pF/m (cond/cond)
Capacitance unbalance pair/pair : 3300 pF/km (p/p @ 1 KHz)
Average characteristic impedance :
100 ± 15
Ω @ 1.0-100.0MHz
100 ± 22 Ω @ 100.0-250.0MHz
100 ± 25 Ω @ 250.0-500.0MHz
Delay skew: <= 45 ns/100 m @ 1.0-500.0 MHz
Velocity of propagation (NVP) : 74 %

Frequency (MHz) :481016202531.2562.5100200250300400500
Attenuation (dB/100m)3.85.35.97.58.49.410.515.019.123.727.631.134.345.3
NEXT (dB)65.360.859.356.254.853.351.947.444.341.739.838.337.133.8
PS-NEXT (dB)63.358.857.354.252.851.349.945.442.339.737.836.335.131.8
ELFEXT (dB)55.849.747.843.741.839.837.931.927.824.321.819.818.313.8
PS-ELFEXT (dB)52.846.744.840.738.836.834.928.924.821.318.816.815.310.8
Return Loss23.024.525.025.025.024.323.621.520.118.918.017.316.815.2
SKEW (ns/100mm)4545454545454545454545454545
Delay (ns/100m)552.0546.7545.4543.0542.0541.2540.4538.6537.6536.9536.5536.3536.1535.6

 

Ordering and delivery information

Pair countP/NO.D [mm]Weight [kg/km]PackagingElectrical numberGTIN
4 pairsDCC6AFTP4PH-5007.0 (±0.2)51.0500m02 103 196410002103199

 

Recommended connectivity

 APS
 Kerman
 System warranty
Keystone jack (toolless)
GSCAT6AL-S72 058 74XG6S72 094 35included
Keystone jack (tool type)
--XA72 093 83included
Patch panelPPE24SU
72 265 11RST2472 474 22included
Field connector
AKLRJ456AS
72 493 25KRJ45U72 093 79not included

 

Extended system warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.
Read more.

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.
SKU: DCC6AFTP4PH-500 Categories: , ,