Description
Store at: 0 to +50 °C
Install at: 0 to +50 °C, Bend minimum: 10 times V.D.
Operate at: -30 to +70 °C, Bend minimum: 15 times V.D.
Design
Conductor material: tinned copper stranded conductors acc. to IEC 60228 class 2
Insulation: XLPE (2X) compound – TS EN 50290-2-29
Core identification:
– pairs: Black, White (Each numbered)
– triples: Black, White, Red (Each numbered)
Pairing: cores twisted to form a pair/triple, PES wrapped
Individual screen: each pair/triple shielded with Aluminium Foil in contact with solid 0,60 mm Tinned copper drain wire
Stranding (Laid up): shielded pairs/triples stranded in layers, PES tape wrapped
Overall screen: aluminium Foil + Tinned copper drain wire 0,50 mm2 (7×0,30 mm)
Inner Sheath: PVC (Y) compound – TS EN 50290-2-22
Armour: Galvanized round steel wire (SWA)
Outer Sheath: PVC (Y) compound – TS EN 50290-2-22
Outer sheath colour: Black, Blue (or on request)
Marking: APS Finland – ww/yy – cable type – 500V – +70°C – IEC60332-1-2 IEC60332-3-24 EN50288-7 – P/N – lot# + meter
Environmental properties and Fire Performances
Flame retardant: IEC60332-1-2
Fire retardant: IEC60332-3-24 Cat.C
Electrical characteristics
Max conductor temperature: +90 °C
Rated Voltage: 500 V
Test voltage: 2,0 kV AC
Insulation resistance: min. 1000 MΩ.km
Capacitance (nF/km) : max. 150 nF/km
Cross section (mm2) 0.50 0.75 1.0 1.3 1.5 2.5
Conductor IEC 60228 class 2 7x0,30 7x0,37 7x0,43 7x0,50 7x0,52 7x0,67
Conductor resistance max.(Ω/km) 36.0 24.5 18.1 14.5 12.1 7.41
Insulation thickness min.(mm) 0.44 0.44 0.44 0.44 0.44 .53
Insulation thickness nom.(mm) 0.60 0.6 0.6 0.6 0.6 0.7
L/R Ratio (µH/Ω) 25 25 25 40 40 60
Ordering and delivery information
Cable type Cable code Copper weight (kg/km) Inner diameter (mm) Armour wire diameter (mm) Overall diameter (mm) Nominal weight (kg/km)
1x2x1.0 RE2XSTYSYFLP1P1 23.5 7.7 0.90 12.3 301
2x2x1.0 RE2XSTYSYFLP2P1 47.8 12.6 0.90 17.7 550
5x2x1.0 RE2XSTYSYFLP5P1 113.0 16.2 1.25 22.5 915
6x2x1.0 RE2XSTYSYFLP6P1 134.5 17.9 1.25 24.2 1050
10x2x1,0 RE2XSTYSYFLP10P1 221.3 23.3 1.25 30.7 1490
1x2x1.3 RE2XSTYSYFLP1P13 30.0 8.0 0.90 12.80 329
16x2x1.3 RE2XSTYSYFLP16P13 460.9 29.5 1.60 39.00 2568
1x2x1.5 RE2XSTYSYFLP1P15 31.8 8.1 0.90 12.7 340
2x2x1.5 RE2XSTYSYFLP2P15 64.8 14.0 0.90 19.0 630
6x2x1.5 RE2XSTYSYFLP6P15 185.1 29.6 1.25 26.0 1200
24x2x1.5 RE2XSTYSYFLP24P15 734.0 36.7 2.00 45.6 3570
1x2x2.5 RE2XSTYSYFLP1PP25 50.6 9.7 0.90 14.5 417
6x2x2.5 RE2XSTYSYFLP6P25 311.0 24.0 1.60 32.4 1935
1x3x2.5 RE2XSTYSYFLP1T25 73.5 9.9 0.90 14.5 440
8x3x2.5 RE2XSTYSYFLP8T25 582.6 32.5 2.00 43.0 3300
Every effort has been put so that this document is most reliable and free from errors. However, APS Cables & Connectors Oy cannot be considered responsible for any mistake in this document and users should consult APS Cables & Connectors Oy for any information needed. APS Cables & Connectors Oy reserves the right to make changes to the documents at any time, without prior notice.
Related products
-
CCTV Composite cable Coax 75Ω RG6, Signal 2PR AWG22, Power 4×2,5mm2 MUD
RG6 75Ohm, 2 pairs AWG22/7, 4 cores 4×2.5mmsq
OC7562P22425HAU Rev.00, Date 2017-05-05 -
MOG Cat.6A S/FTP 4 pairs AWG23/7 SHF2-MUD NEK606 Armoured
Armoured, EMC screened, stranded conductor, SHF2, MUD Resistant NEK606, Fire Retardant IEC60332-3-22 Cat.A
O6ASF4P23F1_U, 18.08.2014/AP rev.3
Type Approval: DNV-GL based on TAE000004C -
MOG Cat.6 LAN cable U/UTP 4 pairs SHF1
Category 6, unscreened, 4 pairs, PVC
