Select Page

MOG

MOG

QFAI 2 UNI type, loose tube, dielectric, SHF2, fire resistant IEC60331, fire retardant IEC60332-3-22 Cat.A

Up to 24 cores, dielectric armoured, SHF2, Fire Resistant & Fire Retardant
QFAI 2 UNI SHF2, 03.05.2018/AP rev.1/AP
Type Approval: –

 

 

Description

 

    

 

Store at : -40 to +70 °C
Install at : -5 to +50 °CBend minimum : 15 times O.D.
Operate at : -40 to +70 °CBend minimum : 10 times O.D.
Pull maximum : 3500N
Crush maximum : 4000N/100mm
Impact maximum : 20J

 

Design

Bare fiber : 250µm
Buffer : Loose tube (Ø2.8mm up to 12 fibers, Ø3.5mm 16-24) filled with jelly, housing up to 24 fibers
Colour code : See table
Fire protection :  mica tape wrapping.
Peripheral member :  anti rodent glass yarns.
Inner sheath : red fire retardant LSZH SHF1 material, typical thickness 1.0mm.
Dielectric armour :  anti rodent glass yarns.
Outer sheath : red fire retardant, UV-resistant LSZH SHF2 material, typical thickness 1.0mm.

Marking :  APS Finland ww/mm – QFAI 2 UNI SHF2 – FIBER OPTIC CABLE [Fibre type] – IEC 60331-25 [1000°C 90min] – IEC 60332-3-22 – Lot no + meter [A]

Environmental properties and Fire Performances

SHF2 : IEC 60092-360 (IEC 60092-359:1987-03)
Degree of acidity of gases :
IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)

Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas :  NES 713, CEI 20-37/7
Flame retardant :  IEC 60332-1-2
Fire retardant :  IEC 60332-3-22 Cat.A
Fire resistant : IEC 60331-25 (1000°C, 90 minutes)
Ozone resistant :
 DIN VDE 0472 part 805 B

Oil resistant :  IEC60811
Water absorption : IEC60502
Water penetration : IEC 60794-1-2-F5-B
UV resistant : ASTM G 154 IEC 60068-2-5

 

Ordering and delivery information

Fiber countOuter diameter (mm)Weight (kg/km)P/NPackaging
211.0140OQFAI202 ff 2drum 2000m (+/-5%)
411.0140OQFAI204 ff 2drum 2000m (+/-5%)
811.0140OQFAI208 ff 2drum 2000m (+/-5%)
1211.0140OQFAI212 ff 2drum 2000m (+/-5%)
1612.0160OQFAI216 ff 2drum 2000m (+/-5%)
2412.0160OQFAI224 ff 2drum 2000m (+/-5%)

ff =  S2 for G652D, A1 for G657A1, M1 for OM1, ME for OM1+, M2 for OM2, M3 for OM3, M4 for OM4, M5 for OM5.

 

 

Colour code of fibers

123456789101112
NaturalRedGreenYellowBrownBlueVioletOrangeGrey WhiteBlackPink
131415161718192021222324
TurquoiseRed/blackGreen/blackYellow/blackBrown/blackBlue/blackViolet/blackOrange/blackGrey/blackWhite/blackPink/blackTurquoise/black

 

 

Other standards of reference

IEC 60092-370Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
DNV TAP 827.50/1Type Approval Program - Optical Fibre Cables
ABS SVRRules for building and classing. Steel Vessels.
ABS SMRRules for building and classing. Steel vessels under 90 meters.
IEC 60793General specifications for both multimode and single-mode optical fibres
IEC 60794general specifications for optical fibres cables
Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.