Description
Store at: 0 to +50 °C
Install at: 0 to +50 °C, Bend minimum: 16 times V.D.
Operate at: -15 to +70 °C, Bend minimum: 16 times V.D.
Design
Conductor material: plain copper conductor according to IEC60228, Cl.1, 0.80 mm
Insulation: PVC extruded compound (-15 + 70°C). Nominal thickness 0.5mm
Lay up: Twisted to core. Colors: red, white. Other custom colours available upon request.
Single screen: N/A
Overall screen: applied over total assembly, wrapped with polyester tape and shielded with Aluminum/Mylar tape. 100% coverage and 25% overlap with metal side in contact with a tinned copper drain wire 7×0,30 size 0,5sqmm.
Bedding: Blue PVC, Polyvinylchloride Low Smoke and Fume extruded compound. Nominal thickness 1.0mm
Armour: STA, Double galvanized steel tape. Nominal thickness 1.0mm.
Outer Sheath: Blue PVC, Polyvinylchloride Low Smoke and Fume extruded compound. Nominal thickness 1.0mm.
Marking: APS Finland – ww/yy – ARMOURED FIRE RETARDANT CONTROL CABLE …x2x0.80 – 300/500V – PVC +70°C – IEC60332-3-24 EN50288-7 – P/N – lot + meter
Environmental properties and Fire Performances
Flame retardant: IEC60332-3-24, CEI 20-22/3
Smoke emissions and fume: IEC60754-1, CEI 20-37
HCL emission: <= 22%
Hydrocarbon and UV resistant:
Electrical characteristics
Max operating Voltage: 500V
Inductance: <= 0,9 mH/Km
Capacitance: <= 0,250 microF/Km
Conductor resistance: ≤ 28.4 ohm/Km
Test voltage core to core: 2 Kv.
Ordering and delivery information
Type | P/N | Nom. O.D [mm] | Nom. weight [kg/km] | Packaging |
---|---|---|---|---|
12 x 2 x 0.8 mm | CURR20B0002 | 24 mm | 1120 | 500m (+/-5%) |
Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.