Select Page

Ethernet cables

MOG

MOG Cat.7A S/FTP 4 pairs solid conductor AWG22/1 SHF1

1500MHz, EMC screened, solid conductor, SHF1, Fire Retardant IEC60332-3-22 Cat.A, LSZH UV-Resistant
O7ASF4P22S1, 16.05.2019/AP rev.2
Type Approval: pending

 

Description

 

    

 

Store at: -40 to +60 °C
Install at: -40 to +60 °CBend minimum: 8 times O.D.
Operate at: -40 to +60 °CBend minimum: 10 times O.D.
Pull maximum: 100N
Cable weight: 68 kg/km

 

Design

Conductor : solid bare copper AWG22/1 
Insulation : Cellular polyolefin  (SFS-PE), typical diam. 1.58 ± 0.02 mm
Pair : No 2 insulated conductors stranded together into a pair
Colour code : 1.White/blue 2.White/orange 3. White/green 4.White/brown (IEC 708-1)
Screen 1 : Aluminium/polyester or Aluminium/polyester/aluminium tape over each single pair
Screen 2 : overall Tinned Copper Wire Braid

Outer jacket : Grey Fire Retardant and UV Resistant SHF1 material, LSZH

Marking : APS Finland – ww/yy – S/FTP 4x2xAWG22/1 Cat.7A LSZH SHF1 – IEC60332-3-22 Cat A – lot + m

 

 

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Smoke emission (Transmittance) ≥ 60%)
Toxicity of evolved gas :  EN 50305 9.2
Flame retardant :  IEC 60332-1-2
Fire retardant :  IEC 60332-3-22 Cat.A
UV resistant :  ASTM-D-2565-99

 

 

Electrical characteristics (IEC 60811, EN 50288-4-2)

Test voltage :  0.7kV a.c. for 1 minute
Resistance of the conductor @ 20°C : ≤ 14,5 /100m
Insulation resistance : ≥ 500 MΩxkm (100V-500V)
Nominal Capacitance @ 800÷1000MHz : 45 pF/m
Average characteristic impedance : 100 ± 5 Ω @ 1-100MHz
Transfer impedance : ≤ 5mΩ/m @ 10MHz 

Frequency (MHz) :1410162031.2562.5100155200300500600
Attenuation dB/100m (typical)1.73.25.06.37.08.913.016.221.223.028.536.240.7
NEXT dB (typical)1101101101101101101101081051021009693
ACR dB/100m10810710510410310197928479716052
ELFEXT dB/100m (typical)10510310098959390858278706360
Return Loss dB (typical)25283030303030302928272625
Frequency (MHz) :100012001500
Attenuation dB/100m (typical)54.257.967.2
NEXT dB (typical)888583
ACR dB/100m342716
ELFEXT dB/100m (typical)524230
Return Loss dB (typical)242321

 

Ordering and delivery information

Pair countP/NO.D [mm]Weight [kg/km]Packaging
4 pairsO7ASF4P22S19.0881000 m (+/-5%)

 

 

 

Other standards of reference

IEC 60092-370 Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units. 
DNV TAP 827.50/2Type Approval Program
ABS SVRRules for building and classing. Steel Vessels.
ABS SMRRules for building and classing. Steel vessels under 90 meters.
CEI EN 50288-1Multi-element metallic used in analogue and digital communication and control : Generic Specification
CEI EN 50288-2-1Setional specification for screened cables characterised up to 100MHz
CEI EN 50288-5-1Setional specification for screened cables characterised up to 250MHz
CEI EN 50288-4-2Setional speci cation for screened cables characterised up to 600MHz
CEI EN 50289 seriesCommunication cables - Specifications for test methods
IEC 60811Insulating and sheathing materials of electric cables - Test method
Standards EIA/TIA 568-C.2, ISO/IEC 11801, UL444, UL1581, UL1666
Applications 100Base-TX, 100Base-T, 100VG-AnyLAN, 1000Base-TX, ATM

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

SKU: O7ASF4P22S1 Categories: , ,