Select Page

Ethernet cables

MOG

MOG Cat.7 S/FTP 4 pairs solid conductor AWG23/1 SHF1

EMC screened, solid conductor SHF1, Fire Retardant IEC60332-3-22 Cat.A
O7SF4P23S1, 16.05.2019/AP rev.0
Type Approval: pending

 

Description

 

    

 

Store at: -40 to +60 °C
Install at: -40 to +60 °CBend minimum: 8 times O.D.
Operate at: -40 to +60 °CBend minimum: 10 times O.D.
Pull maximum: 100N
Cable weight: 68 kg/km

 

Design

Conductor : solid bare copper AWG23/1 
Insulation : Cellular polyolefin  (SFS-PE)
Pair : No 2 insulated conductors stranded together into a pair
Colour code : 1.White/blue 2.White/orange 3. White/green 4.White/brown
Screen 1 : Aluminium/polyester or Aluminium/polyester/aluminium tape over each single pair
Screen 2 : overall Tinned Copper Wire Braid

Outer jacket : Grey Fire Retardant and UV Resistant SHF1 material, LSZH (nominal thickness 0.7mm)
Marking : APS Finland – ww/yy – S/FTP 4x2xAWG23/1 Cat.7 LSZHSHF1 – IEC60332-3-22 Cat A – lot + m

 

 

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Smoke emission (Transmittance) ≥ 60%)
Toxicity of evolved gas :  EN 50305 9.2
Flame retardant :  IEC 60332-1-2
Fire retardant :  IEC 60332-3-22 Cat.A
UV resistant :  ASTM-D-2565-99

 

 

Ordering and delivery information

Pair countP/NO.D [mm]Weight [kg/km]Packaging
4 pairsO7SF4P23S17.768500 m (+/-5%)

 

 

Electrical characteristics (IEC 60811, EN 50288-4-2)

Test voltage :  0.7kV a.c. for 1 minute
Resistance of the conductor @ 20°C : ≤ 14,5 /100m
Insulation resistance : ≥ 500 MΩxkm (100V-500V)
Nominal Capacitance @ 800÷1000MHz : 45 pF/m
Average characteristic impedance : 100 ± 15 Ω @ 1-100MHz
Transfer impedance : ≤ 3mΩ/m @ 10MHz 

Frequency (MHz) :1410162031.2562.5100155200300400500600
Attenuation dB/100m (typical)1.73.25.26.57.39.413.617.022.224.330.235.239.143.5
NEXT dB (typical)105105105105105105103100989593908785
ACR dB/100m1031021009898968983767173554841
ELFEXT dB/100m (typical)9593929190868277737067646260
Return Loss dB (typical)2528303030303030282625242323

Other standards of reference

IEC 60092-370 Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units. 
DNV TAP 827.50/2Type Approval Program
ABS SVRRules for building and classing. Steel Vessels.
ABS SMRRules for building and classing. Steel vessels under 90 meters.
CEI EN 50288-1Multi-element metallic used in analogue and digital communication and control : Generic Specification
CEI EN 50288-2-1Setional specification for screened cables characterised up to 100MHz
CEI EN 50288-5-1Setional specification for screened cables characterised up to 250MHz
CEI EN 50288-4-2Setional speci cation for screened cables characterised up to 600MHz
CEI EN 50289 seriesCommunication cables - Specifications for test methods
IEC 60811Insulating and sheathing materials of electric cables - Test method
Standards EIA/TIA 568-C.2, ISO/IEC 11801, UL444, UL1581, UL1666
Applications 100Base-TX, 100Base-T, 100VG-AnyLAN, 1000Base-TX, ATM

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

SKU: O7SF4P23S1 Categories: , ,