MOG Cat.7 S/FTP 4 pairs AWG23/1 SHF2

EMC screened, solid conductor, SHF2, Fire Retardant IEC60332-3-22 Cat.A
O7SF4P23S2, 16.05.2019/AP rev.1
Type Approval: DNV TAE000004C_R5


Print or Download PDF





Store at: -40 to +60 °C
Install at: -40 to +60 °CBend minimum: 5 times O.D.
Operate at: -40 to +60 °CBend minimum: 10 times O.D.
Pull maximum: 100N



Conductor : solid bare copper AWG23/1 
Insulation : Cellular polyolefin  (SFS-PE), nominal Ø 1.38 mm
Pair : No 2 insulated conductors stranded together into a pair
Colour code : 1.White/blue 2.White/orange 3. White/green 4.White/brown (IEC 708-1)
Screen 1 : Aluminium/polyester or Aluminium/polyester/aluminium tape over each single pair
Screen 2 : overall Tinned Copper Wire Braid

Outer jacket : Grey Fire Retardant and UV Resistant SHF2 material, LSZH 
Marking : APS Finland – ww/yy – S/FTP 4x2xAWG23/1 Cat.7 LSZH SHF2 – IEC60332-3-22 Cat A – lot + m



Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10μS/mm) 
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%) 
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%) 
Toxicity of evolved gas : EN50305 9.2 
Flame retardant : IEC 60332-1-2 
Fire retardant : IEC 60332-3-22 Cat.A 
Ozone resistant : IEC60811-2-1, DIN VDE 0472 part 805 B 
LSZH SHF2 : IEC 60092-360 
Oil resistant : IEC60811 
Water absorption : IEC60811-1-3 
UV resistant : IEC60811-2-1, ASTM-D-2565-92A 
Cold bend & impact : CSA C22.2, UL44 




Electrical characteristics (IEC 60811, EN 50288-4-2)

Test voltage :  0.7kV a.c. for 1 minute
Resistance of the conductor @ 20°C : ≤ 14,5 /100m
Insulation resistance : ≥ 500 MΩxkm (100V-500V)
Nominal Capacitance @ 800÷1000MHz : 45 pF/m
Average characteristic impedance : 100 ± 15 Ω @ 1-100MHz
Transfer impedance : ≤ 3mΩ/m @ 10MHz 


Frequency (MHz) :1410162031.2562.51001552003004005006009001000
Attenuation dB/100m (typical)
NEXT dB (typical)1051051051051051051031009895939087858180
ACR dB/100m10310210098989689837671735548412622
ELFEXT dB/100m (typical)95939291908682777370676462605350
Return Loss dB (typical)25283030303030302826252423232120


Ordering and delivery information

Pair countP/NO.D [mm]Weight [kg/km]Packaging
4 pairsO7SF4P23S28.180500 m (+/-5%)




Other standards of reference

IEC 60092-370 Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units. 
DNV TAP 827.50/2Type Approval Program
ABS SVRRules for building and classing. Steel Vessels.
ABS SMRRules for building and classing. Steel vessels under 90 meters.
CEI EN 50288-1Multi-element metallic used in analogue and digital communication and control : Generic Specification
CEI EN 50288-2-1Setional specification for screened cables characterised up to 100MHz
CEI EN 50288-5-1Setional specification for screened cables characterised up to 250MHz
CEI EN 50288-4-2Setional speci cation for screened cables characterised up to 600MHz
CEI EN 50289 seriesCommunication cables - Specifications for test methods
IEC 60811Insulating and sheathing materials of electric cables - Test method
Standards EIA/TIA 568-C.2, ISO/IEC 11801, UL444, UL1581, UL1666
Applications 100Base-TX, 100Base-T, 100VG-AnyLAN, 1000Base-TX, ATM






Every effort has been put so that this document is most reliable and free from errors. However, APS Cables & Connectors Oy cannot be considered responsible for any mistake in this document and users should consult APS Cables & Connectors Oy for any information needed. APS Cables & Connectors Oy reserves the right to make changes to the documents at any time, without prior notice.

SKU: O7SF4P23S2 Categories: , ,