Description
Store at: -20 to +60 °C
Install at: 0 to +50 °C, Bend minimum: 10/20 times O.D.
Operate at: -30 to +70 °C, Bend minimum: 5/15 times O.D.
Design
Conductor : copperweld Ø 0,72 ± 0.025 mm
Dielectric : low density polyethylene Ø 4.70 ± 0.20 mm
Screen 1 : aluminium/poleysther/aluminium tape (width 20mm)
Screen 2 : silvered copper braid (coverage 96%)
Screen 3 : plain copper braid (coverage 96%)
Outer jacket (inner jacket for armoured version): black Fire Retardant and UV Resistant SHF1 material, LSZH
Marking : APS Finland – ww/yy – RG6 MARINE SHF1 – 75 OHM – IEC60332-3-24 Cat.C – lot + meter
Armoured version is supplied with additional:
Armour : galvanized steel wire braid
Outer jacket : black Fire Retardant and UV Resistant SHF1 thermoplastic material, LSZH
Marking : APS Finland – ww/yy – RG6 MARINE SHF1 ARMOURED – 75 OHM – IEC60332-3-24 Cat.C – DNV – lot + meter
Environmental properties and Fire Performances
Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : YES – IEC 60332-1-2
Fire retardant : YES – IEC 60332-3-22 Cat.A
Fire resistant : NO
Ozone resistant : NO
Weather resistant : NO
LSZH SHF2 : NO
Oil resistant : NO
MUD resistant : NO
Water resistant : NO
Water penetration : NO
UV resistant : YES – ASTM-D-2565-92A
Electrical characteristics (IEC60092-350, EN 50290-2-23, IEC61196-1-108)
Impedance : 75 ± 3 ᘯ Capacitance : 67 ± 3 pF/m
Velocity ratio : 66%
Inner conductor resistance @ 500V : 97 ± 3 Ω/km
Braid resistance @ 500V : 5 ± 3 Ω/km
Spark tension of the sheath : 6 kV
Attenuation
MHz 5 10 50 100 200 300 500 600 800 1000 1350 1500 1750 2150 2250 2500 2750 3000
dB 2.0 2.8 6.0 8.5 12.0 15.0 19.8 21.9 25.5 29.1 34.2 36.6 39.9 45.6 46.5 49.4 52.0 55.8
4
Return Loss (IEC61196-1-113)
MHz 30 ÷ 300 300 ÷ 600 600 ÷ 1000 1000 ÷ 2000 2000 ÷ 3000
dB >28 >20 >19 >16 >15
Ordering and delivery information
| Type | P/N | O.D [mm] | Weight [kg/km] | Packaging | ||
|---|---|---|---|---|---|---|
| RG6AU Non-armoured | OC75R6U1 | 8.5 | 125.5 | 500m or 1000m (+/-5%) | ||
| RG6AU GSWB armoured | OC75R6A1 | 11.5 | 229.4 | 500m (+/-5%) | ||
| RG6AU TCWB armoured | OC75R6T1 | 11.5 | 208.5 | 500m (+/-5%) | ||
| RG6AU BWB armoured | OC75R6B1 | 11.5 | 219.5 | 500m (+/-5%) |
Other standards of reference
| IEC 60092-370 | Electrical installations in ships: Guidance on the selection of cables for telecommunication and data. |
| DNV TAP 827.10/20 | Type Approval Program - coaxial cables |
| ABS SVR | Rules for building and classing. Steel Vessels. |
| ABS SMR | Rules for building and classing. Steel vessels under 90 meters. |
| MIL-C-17 | General specification for radio frequency coaxial cables |
| IEC61196-1 | Coaxial communication cables |
| EN 50290-2-23 | Insulation materials for telecommunication cables |
Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.
Related products
-
MOG Cat.6 F/UTP 4 pairs AWG23/1 SHF1
Category 6A, U/FTP, Non-armored, SHF1, Fire retardant IEC60332-3-22 Cat.A
O6FT4P23S1, 01.06.2014/AP rev.1
Type Approval : pending -
CCTV Composite cable Fire Resistant 4xFO, Power 3×1,5mm2, SHF2-MUD
4 FO, 4×1.5mmsq, IEC60331, MUD Resistant, NEK606.
OC3154xxXHooU Rev.00, Date 2017-05-26 -
MOG Profibus DP 1&2 pairs stranded conductor 0.35mm2 Armoured SHF2
armoured, EMC screened, stranded conductor SHF2, Fire Retardant IEC60332-3-22 Cat.A
OPB1P035F_2, 29.10.2014/AP rev.1
Type Approval: DNV-GL E-13440
