Select Page

MOG

MOG

MOG 75Ohm coaxial cable RG11 NAVY SHF1 unarmoured and armoured

Non-armoured and armoured SHF1, Fire Retardant IEC60332-3-24 Cat.C
OC75R11N1, 02.10.2018/AP rev.0
Type Approval: DNV-GL 

 

 

Description

 

        

 

Store at: -20 to +60 °C
Install at: 0 to +50 °CBend minimum: 10/20 times O.D.
Operate at: -30 to +70 °CBend minimum: 5/15 times O.D

Design

Conductor : bare copper Ø 1.65 + carbon black PE
Dielectric : foam polyethylene + carbon black Ø 7.20 nom.
Screen 1 : aluminium/polyester tape 
Screen 2 : tinned copper braid (coverage 91%)
Outer jacket (inner jacket for armoured version): black Fire Retardant and UV Resistant SHF1 material, LSZH
Marking : APS Finland – ww/yy – RG11 NAVY SHF1 – 75 OHM – IEC60332-3-24 Cat.C – DNV GL – lot + meter

Armoured version:
Inner jacket :black Fire Retardant and UV Resistant material, LSZH
Armour :
galvanized steel, tinned copper or bronze wire braid

Outer jacket : black Fire Retardant and UV Resistant SHF1 thermoplastic material, LSZH
Marking : APS Finland – ww/yy – RG11 NAVY SHF1 ARMOURED – 75 OHM – IEC60332-3-24 Cat.C – DNV GL – lot + meter

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-24 Cat.C
SHF1 : IEC 60092-360

Oil resistant : intermittent splash – permanent resistance available upon request

 

 

Electrical characteristics (IEC60092-350, EN 50290-2-23, IEC61196-1-108)

Impedance : 75 ± 3 ᘯ
Capacitance : 53 ± 3 pF/m
Velocity ratio : 84%
Inner conductor resistance @ 500V :  ≤ 8.2 Ω/km
Braid resistance @ 500V :  ≤ 5.0 Ω/km
Spark tension of the sheath : 3 kV


Attenuation

MHz51050100200500800100015002150250027503000
dB1.21.74.26.29.315.520.523.432.542.545.850.150.1

Return Loss (IEC61196-1-113)
MHz30 ÷ 470470 ÷ 860860 ÷ 2400
dB>31>28>24

 

 

Ordering and delivery information

TypeP/NO.D [mm]Weight [kg/km]Packaging
RG11 NAVY Non-armouredOC75R11N110.8130.0500m or 1000m (+/-5%)
RG11 NAVY GSWB armouredOC75R11NA114.0280.0500m (+/-5%)
RG11 NAVY TCWB armouredOC75R11NT114.0255.0500m (+/-5%)
RG11 NAVY BWB armouredOC75R11NB114.0270.0500m (+/-5%)

 

 

Other standards of reference

IEC 60092-370Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
DNV TAP 827.10/20Type Approval Program - coaxial cables
ABS SVRRules for building and classing. Steel Vessels.
ABS SMRRules for building and classing. Steel vessels under 90 meters.
MIL-C-17General specification for radio frequency coaxial cables
IEC61196-1Coaxial communication cables
EN 50290-2-23Insulation materials for telecommunication cables

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

 

 
SKU: OC75R11N1 Categories: , ,