Print or Download PDF

Description

   

Features

Standards of reference and applications

Installation Features

Store at  -5 to +50 °C
Install at  -0 to +50 °C, Bend minimum : 15 times O.D.
Operate at : -10 to +70 °C, Bend minimum : 12 times O.D.

Design

Optical fiber : 125/250μm Single Mode or Multi Mode
Buffer : 900μm tight, colour coded (see table 1)
Cable core : 12 or 24 optical fibers
Protection : glass or aramide yarns
Sub-unit jacket : fire retardant LSZH material, UV resistant
Marking : numbering 1 to 8
Assembling: from 4 up to 8 sub-units assembled together into a compact core
Wrapping: polyester tape
Outer jacket : fire retardant LSZH material, UV resistant (nominal thickness 1.2mm)
Marking : APS Finland – ww/yy – Fiber Optic Cable TB FTMS “fiber count and type” – LSZH IEC60332-3-24 Cat.C – lot no – meter

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH arvo ≥ 4,3 ja sähkönjohtavuus ≤10μS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 ( ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (≥ 60%)
Toxicity of evolved gas : NES 713, CEI 20-37/7
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-24 Cat.C
UV resistant : UL1581, IEC11801

Fiber Optic characteristics

See detailed specification of optical fibers.

Colour code of fibers

Ordering and delivery information

xx = fiber type        ex. OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4
c = colour               ex. White=W, Yellow=Y, Orange=O, Grey=G,Turquoise=T, Purple=P

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.