Print or Download PDF

Description

  

Standards of reference and applications

Installation Features

Store at  -40 to +70 °C
Install at -10 to +60 °C, Bend minimum 20 times O.D. (installation)
Operate at  -40 to +70 °C, Bend minimum 10 times O.D. (static)

Design

Optical fiber : 125/250μm Single Mode or Multi Mode
Buffer : PBTP loose tube filled with jelly (nominal diameter 3.0mm).
Inner strength member :  aramide yarns.
Inner jacket :  PE black, nominal thickness 1.0mm.
Armour:  steel wire, one layer, coverage ≥80%.
Outer jacket : PE black, UV resistant, nominal thickness 1.5mm.
Marking : APS Finland – ww/yy – Armoured Fiber Optic Cable UTAE fiber count x fiber type – P/N – lot + meter

Environmental properties

UV resistant : UL1581, IEC11801

Mechanical properties

Pulling tension :  max 5000 N (Δα reversible, IEC 60794-1-2-E1)
Crush :  3000N/100mm (Δα reversible, IEC 60794-1-2-E3)
Impact :  15J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

Colour code of fibers

Fiber Optic characteristics

See detailed specification of optical fibers.

Ordering and delivery information

xx = fiber type                  OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
oo = delivery length         2000m=D2
(*) a tolerance of ±5% applies to the delivery length.               

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.