Print or Download PDF

Description

*All images are indicative

  

Features

Standards of reference and applications

Installation Features

Store at  -40 to +70 °C
Install at  -5 to +50 °C, Bend minimum  20 times O.D. 
Operate at  -40 to +70 °C, Bend minimum  10 times O.D. 

Design

Optical fiber : 125/250μm Single Mode or Multi Mode
Buffer : PBTP loose tube filled with jelly (nominal diameter 2.0mm).
Central member : FRP (nominal diameter 2.5mm).
Assembling : tubes and fillers assembled together according to “Colour Code” table
Wrapping :  water blocking tape.
Protection :  anti-rodent glass yarns.
Rip cord :  under the outer jacket.
Outer jacket : Black HDPE material, UV resistant (nominal thickness 1.5mm)
Marking : APS Finland – ww/yy – Fiber Optic Cable  MTE40  fiber count x fiber type – P/N – lot + meter

Environmental properties

UV resistant : UL1581, IEC11801

Mechanical properties

Pulling tension :  4000 N (Δα reversible, IEC 60794-1-2-E1)
Crush :  2000N/100mm (Δα reversible, IEC 60794-1-2-E3)
Impact :  3J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

Colour code of tubes and fibers

Fiber Optic characteristics

See detailed specification of optical fibers.

Ordering and delivery information

xx = fiber type                  ex. OS2=S2, G657A1 = A1, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
oo = delivery length         ex. 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.