Loose Tube Fiber Optic Cables

MOG

LIACC FO Access cable MTAH 2-72 cores, IN/OUT, SWA Armoured

Fiber Optic Outdoor Armoured cable type MTAH, 2-72 cores, 3000N.
MTAH Rev.00, Date 2018-01-05

Print or Download PDF

Description

*All images are indicative

Features

Outdoor, indoor and duct installation
Metallic armour
Low Smoke Zero Halogen

Standards of reference and applications

IEC 60793, IEC 60794
Telecommunication backabones
Intrabuilding Voice and Data/LAN Communication Networks
Installation in Ducts & Conduits

Installation Features

Store at -40 to +70 °C
Install at -10 to +60 °C, Bend minimum 20 times O.D. (installation)
Operate at -40 to +70 °C, Bend minimum 15 times O.D. (static)

Design

Bare fiber : 250µm, SM or MM
Colour code : See table
Buffer : Loose tube (nom 1.9mm) filled with jelly, housing up to 12 fibers.
Colour code : See table
Central member : Thermoplastic resin coated single strand (FRP)
Cable core : Loose tubes and fillers (when necessary) assembled around the central member.
Wrapping : water blocking tape.
Inner sheath : Black LSZH material.
Armour : single layer of galvanized steel wires. Coverage ≥80%.
Outer jacket : Black LSZH UV-Resistant material. Nominal outer diameter 14.5mm.
Marking : APS Finland ww/mm – Fiber Optic Cable MTAH “fiber count and type” – LSZH IEC60332-3-24 Cat.C – lot + meter

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2
Halogen acid gas : IEC 60754-1, IEC 60754-2
Smoke Emission : IEC 61034-2, EN 50268-2
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-24 Cat.C
Water penetration : IEC 60794-1-2-F5-B (inner core only)
UV resistant : IEC60811-2-1, ASTM-D-2565-92A

Mechanical properties

Pulling tension : max 3000 N (Δα reversible, IEC 60794-1-2-E1)
Crush : 3000N/100mm (Δα reversible, IEC 60794-1-2-E3)
Impact : 30J (Δα reversible, IEC 60794-1-2-E4)
Water penetration : 3m cable, 1m water, 24 hours (IEC 60794-1-2-F5), inner core only

Colour code

	1	2	3	4	5	6	7	8	9	10	11	12
Tube Colours	Red	Green	Natural	Natural	Natural	Natural
Fillers	Black
Fiber Colours	Blue	Orange	Green	Brown	Grey	White	Red	Black	Yellow	Violet	Pink	Aqua

Fiber Optic characteristics

See detailed specification of optical fibers.

Ordering and delivery information

Fiber Count	Part Number	No. of tubes	Fibers per tube	Fillers	O.D. (mm)	Weight (kg/km)	Packaging
2	MTAH3002 xx	1	2	5	14.5	280	Drum 2000m +/-5%
4	MTAH3004 xx	1	4	5	14.5	280	Drum 2000m +/-5%
8	MTAH3008 xx	1	8	5	14.5	280	Drum 2000m +/-5%
12	MTAH3012 xx	1	12	5	14.5	280	Drum 2000m +/-5%
24	MTAH3024 xx	2	12	4	14.5	280	Drum 2000m +/-5%
48	MTAH3048 xx	4	12	2	14.5	280	Drum 2000m +/-5%
72	MTAH3072 xx	6	12	0	14.5	280	Drum 2000m +/-5%

xx = fiber type OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
(*) a tolerance of ±5% applies to the delivery length.

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.