Print or Download PDF

Description

  

Features

Standards of reference and applications

Installation Features

Store at  -30 to +70 °C
Install at  -5 to +50 °C, Bend minimum 20 times O.D. (installation)
Operate at  -45 to +70 °C, Bend minimum 15 times O.D. (static)

Design

Optical fiber : 125/250μm Single Mode or Multi Mode
Buffer : PBTP loose tube filled with jelly, housing up to 12 fibers
Cable core :  up to 12 tubes stranded together around a central steel strength member, jelly filled
Protection :  wrapping waterblocking tape
Armour:  corrugated steel tape
Outer jacket : Black HDPE material, UV resistant 
Marking : APS Finland – ww/yy – Armoured Fiber Optic Cable MT209EG fiber count x fiber type – P/N – lot + meter

Environmental properties

UV resistant : UL1581, IEC11801

Mechanical properties

Pulling tension :  2000 N  
Crush :  1000N/100mm 
Impact :  10J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

Colour code of fibers

Colour code of tubes

Fiber Optic characteristics

See detailed specification of optical fibers.

Ordering and delivery information

xx = fiber type                  OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, M5=OM5
oo = delivery length         2000m=D2

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.