LIACC FO Access cable ADSS 2-144 cores, Mid Span 200m

Fiber Optic Access cable type ADSS, Span 200m, LIACC.
MT200 Rev.00, Date 2017-07-24

Print or Download PDF

Description

    
*All images are indicative

 

Features

Aerial installation on HT power lines
All Dielectric Non-Metallic design
Waterproof
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at  -10 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -40 to +70 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with jelly (nominal dial. 2.5 ± 0.1mm)
Central member :  FRP (nominal diameter 2.0mm).
Assembling :  tubes and fillers assembled together according to “Colour Code” table
Wrapping :  water blocking tape.
inner jacket :  Black MDPE material

Peripheral element :  aramide yarns with ripcord.
Outer jacket :  Black HDPE material, UV resistant
Marking :  APS Finland – ww/yy – Fiber Optic Cable ADSS MT200 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Tensile strength :  16.20 kN
Max allowed tension :  6.48 kN
Daily max tension :  4.05 kN
Permission tension :  9.72 kN
Young modulus :  12.52 kN/mm²
Maximum span :  200m
Crush :  3000N/100mm (Δα reversible, IEC 60794-1-2-E3)
Impact :  15J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)
Heat expansion :  5.28 l/°C
CSA :  112.70 mm²

 

 

Colour code of tubes and fibers

123456789101112
Tube ColoursBlueOrangeGreenBrownGreyWhite (natural)RedBlackYellow VioletPinkAqua
Fiber ColoursBlueOrangeGreenBrownGreyWhiteRed BlackYellow VioletPinkAqua
FillersBlack or Grey

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber CountPart NumberNo. of tubesFibers per tubeFillersNominal O.D. (mm)Weight (kg/km)Packaging
2MT20002xxMSPoo12512.0117Drum (2km)
4MT20004xxMSPoo14512.0117Drum (2km)
8MT20008xxMSPoo18512.0117Drum (2km)
12MT200121xxMSPoo112512.0117Drum (2km)
12MT200122xxMSPoo26412.0117Drum (2km)
24MT20024xxMSPoo212412.0117Drum (2km)
48MT20048xxMSPoo412212.0117Drum (2km)
72MT20072xxMSPoo612012.0117Drum (2km)
96MT20096xxMSPoo812012.0117Drum (2km)
144MT20144xxMSPoo1212012.0117Drum (2km)

xx = fiber type                  ex. OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4
oo = delivery length         ex. 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.