LIACC Fiber Optic Splice Closure, Dome type, up to 144 fibers

FOSC144JBS, Rev.00, Date 2018-07-06

Print or Download PDF



  • Dome type;
  • Splicing trays are layered for easy management;
  • Easy to install.

Standards of reference and applications

  • Subscriber Access
  • Fiber-to-the-x
  • Telecommunication, WAN
  • Aerial installations, pipeline laying
  • Pole mount

Installation Features

Store at -0 to +70 °C
Install at -0 to +50 °C
Operate at -40 to +70 °C


Design and specifications

Cable Ports1 IN, 4 OUT
Acceptable Cable Diameter7.0 - 31.0 mm
Sealingheat shrinkable
Maximum Splicing Capacity144 fibers (12 trays, 12 fibers/tray)
Dimension510 x ∅220 mm
Net Weight3 kg
Temperature range-40℃ to +85℃
Atmospheric pressure70∽106KPa
Seal Performance100KPa±5KPa in water (15 minutes, no air bubbles)
Voltage-resistance strength15kv/DC/1min (non-puncture, no arc-over)
Insulation resistance≥2x104MΩ


Seal tape1 pc
Insulation tape1 pc
Nylon tie4 pcs
heat shrinkable sleeve24 pcs
Metal hook1 set
Seal fittings1 pc
Umeral bar1 pc
Retaining ring6 pcs


Recommended connectivity

Cables : all APS fiber optic cables LIACC








Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.