LIACC Fiber Optic Splice Closure, Dome type, up to 144 fibers

FOSCVV015CBS, Rev.01, Date 2023-03-15

Print or Download PDF



  • Dome type;
  • Splicing trays are layered for easy management;
  • Easy to install.
  • Wall-mounting, aerial hanger and pole-mount kit optional

Standards of reference and applications

  • Subscriber Access
  • Fiber-to-the-x
  • Telecommunication, WAN
  • Aerial installations, pipeline laying
  • Pole mount

Installation Features

Store at -0 to +70 °C
Install at -0 to +50 °C
Operate at -40 to +85 °C


Design and specifications

Cable Ports5 pcs (4 pc 18mm, 1 pc 42mm)
Acceptable Cable Diameter18.0 - 42.0 mm
Sealingheat shrinkable
Maximum fiber capacity144 cores
Maximum tray apacity6 pcs (24 slots per tray)
Dimension521 x diam. 182.5 mm
Net Weight4 kg
Temperature range-40℃ to +85℃
Atmospheric pressure70∽106KPa
Seal Performance100KPa±5KPa in water (15 minutes, no air bubbles)
Voltage-resistance strength15kv/DC/1min (non-puncture, no arc-over)


Insulation tape1 pc
Nylon tie4 pcs
heat shrinkable sleeve144 pcs
Metal hook1 set
Gaskets 1 set
Wall mount plate (optional)1 pc
Pole mount kit (optional)1 pc


Recommended connectivity

Cables : all APS fiber optic cables LIACC








Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.