Fiber Optic cable CTG1N215, single loose tube, armoured, LSZH SHF2, fire retardant

Up to 24 cores, armoured by double layer steel tape, IEC60332-3-22 Cat.A, 1500N.
CTG1N215, 01.08.2018/AP rev.0
Type Approval: – 



Print or Download PDF





Store at : -40 to +70 °C
Install at : -10 to +50 °CBend minimum : 20 times O.D.
Operate at : -40 to +90 °CBend minimum : 20 times O.D.
Pull maximum : 1500N
Crush maximum : 2000N/100mm
Impact maximum : 5J
Cable weight : 268 kg/km




Bare fiber : 250µm
Buffer : Loose tube (typical Ø3.0mm) filled with jelly, housing up to 24 fibers
Colour code : See table
Peripheral members : anti-rodent glass yarns
Inner sheath : Black LSZH SHF1 material, fire retardant.
Armour : double layer of helically applied steel tape, with overlap. Optical coverage100%.
Outer jacket : Black LSZH cross-linked  material SHF2, UVR, fire retardant (nominal thickness 1.8mm).
Marking : APS Finland – ww/mm – Fiber Optic Cable CTG1N215 “fiber count and type” – LSZH  SHF2  IEC60332-3-22 Cat.A – lot + meter

Environmental properties and fire performances

SHF2 : IEC 60092-360 (IEC 60092-359:1987-03)
Degree of acidity of gases :
IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)

Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas :  NES 713, CEI 20-37/7
Flame retardant :  IEC 60332-1-2
Fire retardant :  IEC 60332-3-22 Cat.A
Ozone resistant : DIN VDE 0472 part 805 B
Oil resistant :  IEC60811
Water absorption : IEC60502
Water penetration : IEC 60794-1-2-F5-B
UV resistant : ASTM G 154 IEC 60068-2-5


Ordering and delivery information

Fiber countP/NPackaging
2CTG1N21502 ffdrum 2000m (+/-5%)
4CTG1N21504 ffdrum 2000m (+/-5%)
8CTG1N21508 ffdrum 2000m (+/-5%)
12CTG1N21512 ffdrum 2000m (+/-5%)
16CTG1N21516 ffdrum 2000m (+/-5%)
24CTG1N21524 ffdrum 2000m (+/-5%)

ff =  S2 for G652D, A1 for G657A1, M1 for OM1, M2 for OM2, M3 for OM3, M4 for OM4, M5 for OM5.



Colour code of fibers

BlueOrangeGreenBrownGreyWhiteRed BlackYellow VioletPinkAqua


Colour code of tubes



Other standards of reference

IEC 60092-370Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60793General specifications for both multimode and single-mode optical fibres
IEC 60794general specifications for optical fibres cables
Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.