Select Page

MOG

MOG

CCTV Composite cable LAN FTP Cat.6 + Signal + Power, Screened, LSZH

LAN FTP Cat.6 4 pairs screened, Power 2×1.5 + 1.5, Signal 2 PR AWG24/7, LSZH, Fire Retardant, unarmoured.
OC64P2P42115TH Rev.00, Date 2018-07-05

 

Description

      

Standards of reference

IEC 60092-370Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360 Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units.
CEI EN 50289 Communication cables - Specifications for test methods
EN 50290-2-23 Insulation materials for telecommunication cables
IEC 60811 Insulating and sheathing materials of electric cables - Test method
IEC 60793General specifications for both multimode and single-mode optical fibres
IEC 60794General specifications for optical fibre cables

 

 

 

Installation Features

Store at  -10 to +70 °C
Install at  -6 to +50 °C, bend minimum 15 times O.D.
Operate at : -20 to +70 °C, bend minimum : 20 times O.D.
Pull maximum : 80N

 

Design

F/UTP Category 6 
Conductor Bare copper solid wire 0,57 mm / 23 awg
Insulatıon PE 1,0 mm
Core identification EIA/TIA 568 Blue – white/blue stripe, Orange – white/orange stripe 
Green – white/green stripe, Brown – white/brown stripe
Pairing Cores twisted to pairs with different lay lengths
Stranding Pairs stranded around separator, PES tape wrapped
Screening overall Aluminium Foil in contact with 0,50 mm Tinned copper drain wire
Outer sheath PVC Grey / 7,0 mm
Test voltage 1.0 kV AC 
Insulation resistance min. 1000 MOhm.km

 

Power 2×1,5 mm2 (screened)
Conductor Bare copper stranded wire 27×0,25 mm
Insulation PVC 2,80 mm
Core identification Blue, Brown
Shielding Two cores stranded, Aluminium Foil wrapped
Test voltage 2.0 kV AC 
Insulation resistance min. 10 MOhm.km
Conductor resistance 13.3 Ohm/km

 

Power 1×1,5 mm2
Conductor Bare copper stranded wire 27×0,25 mm
Insulatıon PVC 2,80 mm
Core identification Yellow/Green
Test voltage 2.0 kV AC 
Insulation resistance min. 10 MOhm.km
Conductor resistance 13.3 Ohm/km

Signal Cable 2x2x24 awg (st):
Conductor Tinned stranded copper 7×0,20 mm
Insulatıon PE 1,20 mm
Core identification (White-Blue) (White-Orange)
Pairing/Stranding Cores twisted to form a pairs, Pairs stranded together, PES wrapped
Shielding Aluminium Foil + 7×0,20 mm Tinned copper drain wire
Sheath thickness nom. 0,60 mm
Sheath PVC 6,0 mm
Test voltage 1.0kV AC
Insulation resistance  min. 1000 Mohm.km
Conductor resistance  max 96.0 Ohm/km

Assembling

Stranding (Laid-up) CAT6+signal cable+Shielded pair+1Cx1,5 mm2 stranded together  (if necessary non-hygroscopic  Fillers or threads used) , PES wrapped (separator)
Braiding overall Tinned copper drain wire braiding 0,12 mm / coverage %60 + Aluminium Foil
Outer sheath PVC compound / Black
Outer sheath thickness nom.1,50 mm
Outer diameter 17,0 mm ±1,5



Marking

APS Finland – ww/yy  –  CCTV COMPOSITE CABLE – F/UTP Category 6 + SIGNAL 2 PAIRS + POWER 2×1.5 + 1.5 mm²  –  P/N  –  LSZH IEC60502  IEC60332-3 –  lot + m 

 

Environmental properties 

Halogen amount/acidity tests TS EN 60754-1/2
Smoke density test TS EN 61034-2
Flame retardance IEC 60332-2-1

 

 

Ordering and delivery information

P/NPackaging
OC64P2P42115THdrum 500m (+/-5%)

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

SKU: OC64P2P42115TH Categories: , ,