CCTV Cables

MOG

CCTV Composite cable Fire Retardant Fiber Optic + Signal + Power, LSZH-ATAR

2 optical fibres, 1 pair AWG24, 4×0.5mm², LSZH, Fire Retardant, Anti-Termite & Anti-Rodent.
OC2S21P24305HA Rev.00, Date 2017-07-05

 

Awaiting product image

Print or Download PDF

Description

      

Standards of reference

IEC 60092-370Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360 Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units.
CEI EN 50289 Communication cables - Specifications for test methods
EN 50290-2-23 Insulation materials for telecommunication cables
IEC 60811 Insulating and sheathing materials of electric cables - Test method
IEC 60793General specifications for both multimode and single-mode optical fibres
IEC 60794General specifications for optical fibre cables

 

 

 

Installation Features

Store at  -10 to +70 °C
Install at  -10 to +50 °C, bend minimum 20 times O.D.
Operate at : -35 to +80 °C, bend minimum : 20 times O.D.
Pull maximum : 100N

 

Design

Fiber Optic, 2 cores
Fiber: 125/250μm SM or MM (see Fiber Characteristics datasheets)
Buffer: PBTP tube nominal diam 1.8mm filled with jelly
Colour code: 1.Natural  2.Red
Protection: Glass yarns (alternatively aramide yarns)
Jacket: LSZH Orange, nominal thickness 0.7mm, nominal outer Ø 3.5mm 

Signal 1 pair AWG24
Conductor :  stranded tinned copper AWG24/7 strands
Insulation :  polyethylene nominal Ø 1.50
Assembling : no 2 insulated conductors colour coded (1.White, 2.Black) stranded together into a pair.
Screen : aluminium/polyester tape 100% coverage with tinned copper drain wire
Sheath : non-corrosive thermoplastic compound, LSZH, nom. Ø 4.4mm, colour coded (1.Black 2.Bue)
Resistance of conductor @ 20°C :  ≤ 90 Ω/km
Insulation resistance @ 20°C :  ≥ 1000 MΩ x km 
Test Voltage :  1000 V DC x 1 minute

Power 4 conductors AWG20 (0.5mm²)
Conductor :  stranded tinned copper AWG20 (7×0.28mm²)
Insulation :  XLPE, nominal Ø 2.5mm, colour coded (1.Blue, 2.Brown, 3.Grey 4.Green/Yellow)
Conductor DCR @ 20°C :  10.3 Ω/1000ft, Nominal
Insulation resistance @ 20°C :  ≥ 1GΩ x km
Test Voltage :  2000V AC x 1 minute
Operating Voltage :  300V 

Assembling
Cable core : optical fiber, signal and power elements stranded together into a compact core, with fillers and wrapping where necessary.
Jacket :  LSZH thermoplastic compound, Anti-Rodent and Anti-Termite, Ø 16.0mm, black colour 
Marking : APS Finland – ww/yy  –  CCTV COMPOSITE CABLE 2x “fiber type” + 1 PR AWG24 + 4×0.5mm²  –  P/N –  LSZH IEC60332-3-24 Cat.C  –  lot + m 

 

 

 

Environmental properties and Fire Performances

Degree of acidity of gases :  IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10μS/mm)
Halogen acid gas :  IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission :  IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas :  EN50305 9.2
Flame retardant :  IEC 60332-1-2
Fire retardant :  IEC 60332-3-24 Cat.C 

 

Ordering and delivery information

Cable typeP/NO.D [mm]Weight [kg/km]Packaging
UnarmouredOC2xx1P24305HA 16.0-drum 500m (+/-5%)

XX =  fiber type = OS2 = S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4.

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

SKU: OC2S21P24305HA Categories: , ,

Related products