Description
Standards of reference
IEC 60092-370 Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360 Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units.
CEI EN 50289 Communication cables - Specifications for test methods
EN 50290-2-23 Insulation materials for telecommunication cables
IEC 60811 Insulating and sheathing materials of electric cables - Test method
IEC 60793 General specifications for both multimode and single-mode optical fibres
IEC 60794 General specifications for optical fibre cables
Installation Features
Store at -10 to +70 °C
Install at -6 to +50 °C, bend minimum 15 times O.D.
Operate at : -30 to +80 °C, bend minimum : 20 times O.D.
Pull maximum : 350N
Design
Category 6A, 4 pairs
Conductor : plain annealed copper wire, solid, nominal Ø 0.56mm
Insulation : SFS polyethylene, nominal Ø 1.33mm
Colour code : white/blue, white/orange, white/green, white/brown.
Screen : collective aluminium/mylar tape, 100% coverage with tinned copper drain wire
Sheath : blue non-corrosive thermoplastic compound, LSZH, nominal Ø 7.5mm
Power 3 conductors 2.5mm²
Conductor : plain annealed copper wire, 7 strands, 2.5mm2
Insulation : XLPE, nominal Ø 3.5mm, colour coded (1.Brown, 2.Black, 3.Grey)
DC resistance per core @ 20°C : ≤ 7.6 Ω/km
Insulation resistance @ 20°C : ≥ 5000 MΩ x km
Mutual capacitance : max 150 nF/km
Inductance : max 1 mH/km
Test Voltage core/core : 5000 V
Test Voltage core/screen : 2000 V
Operating Voltage : 600/1000V
Assembling
Cable core : 1 Category 6A element and 3 power conductors stranded together into a compact core, with fillers and wrapping where necessary.
Inner jacket : LSZH thermoplastic compound, Ø 12.7mm, black colour
Armour : Galvanized Steel Wire Braid, coverage ≥ 80% (alternatively concentric steel or stainless steel wire, or bronze braid)
Outer jacket : LSZH thermoplastic compound, Ø 17.7mm, black colour
Marking : APS Finland – ww/yy – CCTV COMPOSITE CABLE DATA Category 6A 4P + POWER 3×2.5mm² – P/N – LSZH IEC60502 IEC60332-3 – lot + m
Environmental properties and Fire Performances
Degree of acidity of gases : IEC 60754-1, IEC 60754-2
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance ≥ 60%)
Toxicity of evolved gas : EN50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3
UV retardant : UL 1581 sect. 1200
Ordering and delivery information
Cable type P/N O.D [mm] Weight [kg/km] Packaging
Unarmoured OC6A4PFU325H 12.7 390 drum 500m (+/-5%)
Armoured GSWB OC6A4PFU325FH 17.5 500 drum 500m (+/-5%)
Armoured GSWA OC6A4PFU325AH 17.7 543 drum 500m (+/-5%)
Armoured Bronze braid OC6A4PFU325BH 17.5 500 drum 500m (+/-5%)
Armoured St. Steel braid OC6A4PFU325SH 18.5 570 drum 500m (+/-5%)
Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.
Related products
-
MOG Cat.6 F/UTP 4 pairs AWG23/1 SHF1
Category 6A, U/FTP, Non-armored, SHF1, Fire retardant IEC60332-3-22 Cat.A
O6FT4P23S1, 01.06.2014/AP rev.1
Type Approval : pending -
MOG Cat.5e S/FTP 4 pairs AWG24/7 SHF1
Cat.5e LAN cable S/FTP 4 pairs SHF1, EMC screened, stranded conductor Fire Retardant IEC60332-3-22 Cat.A
01.06.2014/AP rev.1 -
MOG Profibus DP 1&2 pairs stranded conductor 0.35mm2 Armoured SHF2
armoured, EMC screened, stranded conductor SHF2, Fire Retardant IEC60332-3-22 Cat.A
OPB1P035F_2, 29.10.2014/AP rev.1
Type Approval: DNV-GL E-13440
