Description
Standards of reference
IEC 60092-370 Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360 Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units.
CEI EN 50289 Communication cables - Specifications for test methods
EN 50290-2-23 Insulation materials for telecommunication cables
IEC 60811 Insulating and sheathing materials of electric cables - Test method
IEC 60793 General specifications for both multimode and single-mode optical fibres
IEC 60794 General specifications for optical fibre cables
Installation Features
Store at -10 to +70 °C
Install at -6 to +50 °C, bend minimum 15 times O.D.
Operate at : -20 to +80 °C, bend minimum : 20 times O.D.
Pull maximum : 350N
Design
| Coaxial cable 75Ohm | |
| Conductor | Bare copper stranded 7×0,30 mm |
| Insulatıon | PE Solid 4,85 mm |
| Braiding | Bare copper wire braiding 0,12 mm / Coverage %90 |
| Sheath | HFFR compound |
| Outer diameter | 6,90 ±0,20 mm |
| Conductor resistance (@ 20C) | ≤ 37.40 |
| Insulation resistance (@ 20C) | ≥ 1000 Mohm/km |
| Test voltage | 1.5kV AC |
| Power 3 conductors 1.5mm² | |
| Conductor | Tinned copper stranded wire 59×0,18 mm |
| Insulatıon | XLPE 2,70 mm |
| Insulation thickness | 0,55 mm |
| Core identification | Red, White, Blue |
| Conductor resistance (@ 20C) | ≤ 13.30 |
| Insulation resistance (@ 20C) | ≥ 1000 Mohm/km |
| Test voltage | 2.5KV AC |
| Signal 1 Pair AWG24/7 | |
| Conductor | Tinned stranded copper 7×0,20 mm |
| Insulatıon | PE 1,20 mm |
| Insulation thickness | 0,30 mm |
| Core identification | White, Blue |
| Pairing | Cores twisted, PES wrapped |
| Shielding | Aluminium Foil + 7×0,20 mm Tinned copper drain wire |
| Conductor resistance (@ 20C) | ≤ 96.0 |
| Insulation resistance (@ 20C) | ≥ 1000 Mohm/km |
| Test voltage | 1kV AC |
Assembling
| Stranding (Laid-up) | Coax+3 cores+shielded signal pair stranded together (if necessary non-hygroscopic fillers or threads used) , PES wrapped (separator) |
| Braiding overall | Tinned copper drain wire braiding 0,12 mm / coverage %80 + Aluminium Foil |
| Outer sheath | HFFR compound |
| Outer sheath colour | Orange |
| Outer sheath thickness | nom.1,80 mm |
| Outer diameter | 14,30 mm ±1,5 |
Marking
APS Finland – ww/yy – CCTV COMPOSITE CABLE – COAX 75 OHM + SIGNAL 1 PAIR + POWER 3×1.5mm² – P/N – LSZH IEC60502 IEC60332-3 – lot + m
Environmental properties
| Halogen amount/acidity tests | TS EN 60754-1/2 |
| Smoke density test | TS EN 61034-2 |
| Flame retardance | IEC 60332-2-1 |
Ordering and delivery information
| P/N | Packaging |
|---|---|
| OC74851P4315TH | drum 500m (+/-5%) |
Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.
Related products
-
CCTV Composite cable Fire Resistant 4xFO, Power 3×1,5mm2, SHF2-MUD
4 FO, 4×1.5mmsq, IEC60331, MUD Resistant, NEK606.
OC3154xxXHooU Rev.00, Date 2017-05-26 -
MOG Profibus DP 1&2 pairs stranded conductor 0.35mm2, SHF2 MUD NEK606
EMC screened, stranded conductor SHF2, MUD Resistant NEK606, Fire Retardant IEC60332-3-22 Cat.A
OPB_P035FU, 19.05.2014/AP rev.2
Type Approval: DNV-GL TAE00001S5 -
MOG Profibus 1&2 pairs, Fire Resistant, Armoured, SHF2
Armoured, EMC screened, solid or stranded conductor SHF2, Fire Resistant IEC60331-23, Fire Retardant IEC60332-3-22 Cat.A
OPBX1P035F1x2, 30.12.2015/AP rev.01
Type Approval: DNV-GL TAE000014Z
