Print or Download PDF

Description

      

Standards of reference

IEC 60092-370	Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360	Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units.
CEI EN 50289	Communication cables - Specifications for test methods
EN 50290-2-23	Insulation materials for telecommunication cables
IEC 60811	Insulating and sheathing materials of electric cables - Test method
IEC 60793	General specifications for both multimode and single-mode optical fibres
IEC 60794	General specifications for optical fibre cables

Installation Features

Store at  -30 to +70 °C
Install at  -10 to +50 °C, bend minimum 250 mm
Operate at : -30 to +80 °C, bend minimum : 250 mm
Pull maximum : 2000N

Design

Fiber Optic, Multimode, 2 cores
Fiber: 62.5/125μm OM1 (see Fiber Characteristics datasheets)
Buffer: dual protection layer, 900μm
Protection: aramide yarns
Jacket: numbered (1,2) blue LSZH material, nominal outer Ø 2.8mm
Wrapping: slipping tape

Fiber Optic, Singlemode, 2 cores
Fiber: 9/125μm OS2 G.652.D (see Fiber Characteristics datasheets)
Buffer: dual protection layer, 900μm
Protection: aramide yarns
Jacket: numbered (1,2) orange LSZH material, nominal outer Ø 2.8mm
Wrapping: slipping tape

Power 3 conductors 2.5mm²
Conductor:  stranded bare copper 2.5mm2 (IEC60228, Class 5)
Insulation:  Low Smoke Zero Halogen G10-type compound, nominal Ø 3.3mm
Colour code: 1.Blue, 2.Brown, 3.Green/Yellow (UNEL 00722)
Voltage rating:  300V 

Assembling
Cable core:  power and fiber elements stranded together with fillers if necessary, wrapped by binding tape
Screen: tinned copper wire braid, minimum coverage 85%
Strength element:  aramid yarns braid 
Inner jacket: orange LSZH compound, nom. Ø 12.7mm 
Armour: galvanised steel wire braid, minimum coverage 80%
Outer jacket: orange LSZH compound, MUD and UV resistant, black colour, nom. Ø 17.3mm
Marking
APS Finland – ww/yy – ARMORED COMPOSITE CABLE 2xSM OS2 + 2xMM OM1 + 3×2.5mm2 – P/N – LSZH MUD NEK606 IEC60332-3-24 – lot – CE + meter

Environmental properties and Fire Performances

Degree of acidity of gases :  IEC 60754-2, EN 50267-2-2 (pH value ≥ 4,3 and Conductivity ≤10μS/mm)
Halogen acid gas :  IEC 60754-1, EN 50267-2-1(Halogen acid gas emission ≤ 0.5%)
Smoke Emission :  IEC 61034-1, IEC 61034-2 (Transmittance ≥ 60%)
Flame retardant :  IEC 60332-1-2
Fire retardant :  IEC 60332-3-24
Ozone resistant :  IEC60811-2-1 
LSZH SHF2 :  IEC 60092-360
Oil resistant :  IEC60811, IRM 903
MUD resistant :  NEK606:2009, IEC60092-360
Water absorption :  IEC60811-1-3
UV resistant :  IEC60811-2-1 
 

Ordering and delivery information

 Engineered by APS Team

Every effort has been put so that this document is most reliable and free from errors. However, APS Cables & Connectors Oy cannot be considered responsible for any mistake in this document and users should consult APS Cables & Connectors Oy for any information needed. APS Cables & Connectors Oy reserves the right to make changes to the documents at any time, without prior notice.