Print or Download PDF

Description

Store at : -40 to +70 °C
Install at :-10 to +50 °C, Bend minimum : 20 times O.D.
Operate at : -40 to +80 °C, Bend minimum : 20 times O.D.

Design

Coaxial, 75Ohm RG11

Inner conductor : stranded tinned copper 7×0.40mm
Dielectric : polyethylene Ø 7.25 ± 0.18 mm
Braid : bare copper, coverage 97%
Wrapping : non-migrating polyester tape
Sheath : non-corrosive thermoplastic compound, Low Smoke Zero Halogen Ø 10.3 ± 0.20 mm
Velocity : 67%
Capacitance : 67 pF/m
Resistance conductor : 20.5 Ω/km
Resistance braid : 4.4 Ω/km
Attenuation : @ 1000MHz 23.4 dB/100m
Attenuation : @ 3000MHz 50.1 dB/100m
Return Loss : @ 3000MHz > 20.0 dB
Screening effectiveness : > 20.0 dB

Signal, 2 pairs AWG22

Conductor : stranded tinned copper AWG22/7 Insulation : polyethylene nominal Ø 2.55
Assembling : no 2 insulated conductors colour coded (1.White, 2.Black) stranded together into a pair.
Screen : aluminium/polyester tape 100% coverage with tinned copper drain wire
Sheath : non-corrosive thermoplastic compound, LSZH, nom. Ø 4.3mm, colour coded (1.Black 2.Bue)
Resistance of conductor @ 20°C : ≤ 90 Ω/km
Insulation resistance @ 20°C : ≥ 1000 MΩ x km
Test Voltage : 1000 V DC x 1 minute

Power, 3 cores 2.5mm2

Conductor : stranded tinned copper 2.5mm2
Insulation : cross linked polyethylene nominal Ø 4.0mm, colour coded (1.Blue, 2.Brown, 3.Green/Yellow)
Conductor resistance @ 20°C : ≤ 7.98 Ω/km
Insulation resistance @ 20°C : ≥ 5000 MΩ x km
Test Voltage : 2000 V AC x 1 minute

Assembling

Cable core : coaxial, signal and power elements stranded together into a compact core, with llers and wrapping
Inner jacket (outer for unarmoured version) : SHF1 thermoplastic compound LSZH, Ø 17.5mm, black colour
Marking : APS Finland – ww/yy – ARMOURED COMPOSITE CABLE “PN” – SHF1 IEC60332-3-24 – lot + m

Armoured version

Armour : galvanized steel wire braid, coverage ≥80% (alternatives : Bronze braid, Stainless steel braid)
Outer jacket : SHF1 thermoplastic compound LSZH, nom. Ø 25.0mm, black colour
Marking : APS Finland – ww/yy – ARMOURED COMPOSITE CABLE “PN” – SHF1 IEC60332-3-24 – lot + m

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10μS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-24 Cat.C
Oil resistant : intermittent splash – permanent resistance available upon request
UV resistant : IEC60811-2-1, ASTM-D-2565-92A