Description
Store at : -10 to +70 °C
Install at : -10 to +50 °C, Bend minimum : 20 x O.D.
Operate at : -35 to +80 °C, Bend minimum : 25 x O.D.
Design
2 x 75Ohm RG59
Inner conductor : solid bare copper wire Class 1 0.58mm
Dielectric : polyethylene nominal Ø 3.70
Braid : bare copper, coverage ≥95%
Sheath : non-corrosive thermoplastic compound, Low Smoke Zero Halogen nominal Ø 6.15 mm
Velocity : 66%
Capacitance : 67 pF/m
Resistance conductor : 154 ± 5 Ω/km
Resistance braid : 9 ± 3 Ω/km
Attenuation @ 500MHz : 24.8 dB/100m
Attenuation @ 1000MHz : 35.6 dB/100m
Attenuation @ 3000MHz : 67.7 dB/100m
Return Loss @ 3000MHz : > 14.0 dB
Signal, 2 pairs AWG24
Conductor : stranded tinned copper AWG24/7 strands
Insulation : polyethylene nominal thickness 0.40mm
Assembling : no 2 insulated conductors colour coded (1.White, 2.Black) stranded together into a pair.
Screen : aluminium/polyester tape 100% coverage with tinned copper drain wire
Sheath : non-corrosive thermoplastic compound, LSZH, nom. Ø 4.8mm, colour coded (1.Black 2.Grey)
Resistance of conductor @ 20°C : 90 Ω/km
Insulation resistance @ 20°C : ≥ 1000 MΩ x km
Test Voltage : 1000 V DC x 1 minute
Power, 2 cores 2.5mm2
Conductor : stranded tinned copper 2.5mm2
Insulation : cross linked polyethylene nominal Ø 3.5mm, colour coded (1.Blue, 2.Brown, 3.Green/Yellow)
Conductor resistance @ 20°C : ≥ 8.21 Ω/km
Insulation resistance @ 20°C : ≥ 5000 MΩ x km
Test Voltage : 2000 V AC x 1 minute
Assembling
Cable core : coaxial, signal and power elements stranded together into a compact core, with fillers and wrapping
Inner jacket (outer for unarmoured version): : thermoplastic compound LSZH SHF1, nom. thick. 0.80mm, black
Marking : APS Finland – ww/yy – COMPOSITE CABLE OC752592P243251 – SHF1 IEC60332-3-24 – lot + m
Armoured version
Armour : galvanized steel wire braid, coverage ≥85% (Alternatives : Bronze braid, Tinned Copper braid, Stainless steel wire)
Outer jacket : thermoplastic compound LSZH SHF1, nom. thickness 1.50mm, black colour
Marking : APS Finland – ww/yy – ARMOURED COMPOSITE CABLE – P/N – SHF1 IEC60332-3-24 – lot + m
Environmental properties and Fire Performances
Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-24 Cat.C
Oil resistant : intermittent splash – permanent resistance available upon request
Water penetration : NO
Ordering and delivery information
Cable type | P/N | O.D [mm] | Weight [kg/km] | Packaging |
---|---|---|---|---|
Unarmoured | OC752592P243251 | 16.5 | 420 | drum 500m (+/-5%) |
Armoured GSWB | OC752592P24325HF1 | 19.6 | 580 | drum 500m (+/-5%) |
Armoured GSWA | OC752592P24325HA1 | 21.0 | 630 | drum 500m (+/-5%) |
Armoured Bronze braid | OC752592P24325HB1 | 19.6 | 580 | drum 500m (+/-5%) |
Armoured St. Steel braid | OC752592P24325HS1 | 19.6 | 620 | drum 500m (+/-5%) |
Other standards of reference
IEC 60092-370 Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360 Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units.
CEI EN 50289 series Communication cables - Specifications for test methods
MIL-C-17 General specification for radio frequency coaxial cables
IEC61196-1 Coaxial communication cables
EN 50290-2-23 Insulation materials for telecommunication cables
IEC 60811 Insulating and sheathing materials of electric cables - Test method
Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed.