CCTV Cables

MOG

CCTV cable 2 optical fibers, 3 Power cores, SHF1

Power 3×2,5mm2, 2 Optical Fibres armoured or unarmoured, SHF1, Fire Retardant IEC60332-3-22 Cat.A
OC3252xx1, 23.08.2017/AP rev.0

 

Print or Download PDF

Description

   

Store at : -40 to +80 °C
Install at : -10 to +50 °C, Bend minimum : 25 (arm.) or 12 (non-arms.) times O.D.
Operate at : -40 to +80 °C, Bend minimum : 20 (arm.) or 15 (non-arms.) times O.D.
Pull maximum : 1000N
Crush maximum : 200N/100mm

Design

 

Fiber optic 2 Cores

Fiber : Fiber: 125/250µm SM or MM (see Fiber Characteristics datasheets)
Buffer : PBTP tube nominal diam 1.8mm filled with jelly (alternatively tight buffer design)
Colour code : 1.Natural 2.Red 
Protection : Glass yarns (alternatively aramide yarns)
Jacket : LSZH Orange, nominal thickness 0.7mm, nominal outer Ø 3.5mm

Power, 3 cores 2.5mm2

Conductor : stranded tinned copper 2.5mm2 (According to Class 5 IEC 60228, Ø of strands 0.25mm)
Insulation : cross linked polyethylene (XLPE) nominal Ø 3.5mm, colour coded (1.Brown, 2.Blue, 3.Green/Yellow)
Conductor resistance @ 20°C : ≤ 8.21 Ω/km
Insulation resistance @ 20°C : ≥ ≥ 1GΩ x km
Operating Voltage : 600/1000V
Test Voltage : 3500 V AC x 1 minute

Assembling

Cable core : power and fiber elements stranded together around a central filler and wrapped by synthetic tape
Inner jacket (outer for non-armoured version) : non-corrosive thermoplastic compound, LSZH SHF1, nom. Ø 11.0mm, black colour
Marking (non-armoured version) : APS Finland – ww/yy – COMPOSITE CABLE 2xFO 3×2.5mm² – P/N – LSZH SHF1 IEC60332-3-22 Cat.A – lot + meter mark

Armour : galvanized steel wire armour, coverage ≥85%
Outer jacket : non-corrosive thermoplastic compound LSZH, nom. Ø 15.0mm, black colour
Marking : APS Finland – ww/yy – ARMOURED COMPOSITE CABLE 2xFO 3×2.5mm² – P/N – LSZH SHF1 IEC60332-3-22 Cat.A – lot + meter mark

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Oil resistant : intermittent splash – permanent resistance available upon request
Water penetration : IEC 60794-1-2-F5-B (fiber unit), upon request for the whole inner core.
UV resistant : IEC60811-2-1, ASTM-D-2565-92A

 

Ordering and delivery information

  P/N O.D [mm] Weight [kg/km] Packaging 
OC3252xx1 non-armoured 11.0 370 drum 500m (+/-5%) 
OC3252xxHF1 armoured 15.0 480 drum 500m (+/-5%) 

xx = Fiber type : OS2=S2 – OM1=M1 – OM2=M2 – OM3=M3 – OM4=M4

 

 

Other standards of reference

IEC 60092-370Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units.
CEI EN 50289 seriesCommunication cables - Specifications for test methods
MIL-C-17General specification for radio frequency coaxial cables
IEC61196-1Coaxial communication cables
EN 50290-2-23Insulation materials for telecommunication cables
IEC 60811Insulating and sheathing materials of electric cables - Test method

 

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed.
 

 

 

 

 

SKU: OC3252xx1 Categories: , ,

Related products