Select Page

MOG

MOG Cat.6 LAN cable U/UTP 4 pairs SHF1

Category 6, unscreened, 4 pairs, PVC

Description

Store at : -40 to +70 °C
Install at : -40 to +70 °C
Operate at : –40 to +70 °C
Bend minimum : 10 times O.D.
Bend minimum : 10 times O.D.
Pull maximum : 40N

Design

Conductor : solid bare copper AWG23
Insulation : polyethylene
Pair : 2 insulated conductors stranded together into a pair
Colour code : 1.White/blue 2.White/orange 3. White/green 4.White/brown
Assembling : no 4 pairs assembled together around a PE central cross
Screen : aluminium/mylar tape (coverage 100%) with tinned copper drain wire 0.50mm
Inner jacket : grey Fire Retardant SHF1 material (nominal Ø 7.2mm)
Outer jacket : grey or black Fire Retardant SHF1 UV-Resistant material (nominal Ø 8.6mm)
Marking : APS Finland – ww/yy – U/UTP 4x2xAWG23/1 Cat.6 SHF1 – IEC60332-3-22 Cat A – lot + meter

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Fire resistant : NO
Ozone resistant : upon request
Weather resistant : upon request
LSZH SHF2 : upon request
Oil resistant : intermittent splash – permanent resistance available upon request
MUD resistant : upon request
Water absorption : upon request
Water penetration : NO
UV resistant : IEC60811-2-1, ASTM-D-2565-92A

Electrical characteristics

Test voltage : 2500 V DC for 2 minutes
Resistance of the conductor @ 20°C : ≤ 68 Ω/km
Insulation resistance : ≥ 5 GΩxkm
Nominal Capacitance : 52 pF/m (cond/cond)
Average characteristic impedance : 100 ± 5 Ω @ 100MHz

[table “2” not found /]

Ordering and delivery information

[table “3” not found /]

 

Recommended connectivity

Keystone jack : MJ6UK / RJ45
plug : P456UAPS
Panel : OPPE24SU
Patchcords : PCMJ6U_WLZ

Other standards of reference

IEC 60092-370 : Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
IEC 60092-360 : Electrical installations in ships: Insulating and sheating materials for shipboard and offshore units.
DNV TAP 827.50/2 : Type Approval Program
ABS SVR : Rules for building and classing. Steel Vessels.
ABS SMR : Rules for building and classing. Steel vessels under 90 meters.
CEI EN 50288-1 : Multi-element metallic used in analogue and digital communication and control : Generic Specification
CEI EN 50288-4-2 : Setional specification for screened cables characterised up to 600MHz
CEI EN 50289 : series Communication cables – Specifications for test methods
IEC 60811 : Insulating and sheathing materials of electric cables – Test method

Category: