Select Page

MOG

MOG

BOXAH fiber optic cable breakout armoured, LSZH Fire and Hydrocarbon Resistant

Up to 24 cores, armoured LSZH, Fire Resistant IEC60331-25, Fire Retardant IEC60332-3-22
BOXAH, 07.07.2018/AP rev.0

 

 

Description

   

 

 

Store at: -40 to +70 °C
Install at: -10 to +50 °CBend minimum : 20 times O.D.
Operate at : -40 to +70 °CBend minimum : 15 times O.D.
Crush maximum : 4000N/100mm
Impact maximum : 15J

 

 

Design

Bare fiber : 250µm
Buffer : 900µm tight buffer
Colour code : white
Protection : aramide yarns
Inner sheath : Blue LSZH material, nominal diameter 2.0mm, each numbered for identification (1 to 24)
Cable core : up to 24 single sheathed fibers are assembled together (around a central member if needed) and wrapped by a fire protection tape.
Overall protection : glass yarns
Intermediate jacket : Blue LSZH material, nominal thickness 1.0mm
Armour : galvanized steel wire braid, coverage ≥85%
Outer jacket : Blue LSZH UV-Resistant material, nominal thickness 1.2mm
Marking : APS Finland ww/mm – ARMOURED Fiber Optic Cable BREAKOUT “fiber count / type” + “P/N” – LSZH IEC60331-25 IEC60332-3-22 Cat A – lot + meter

 

 

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission :  IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Fire resistant : IEC 60331-25 (@ 750° for 90min) : max attenuation 1.0 dB/fibre (SM), 1.5 dB/fibre (MM).
Oil resistant : intermittent splash – permanent resistance available upon request
Water absorption : IEC60502
UV resistant : IEC60811-2-1, ASTM-D-2565-92A
Hydrocarbon resistant :  IEC 60811

 

Features

Fiber countSimplex outer diameter (mm)Intermediate jacket diameter (mm)Outer jacket thickness (mm)Cable Outer Diameter (mm)Cable weight (kg/km)Pulling tension (N)
22,07,31,511.31201000
42,07,31,511,31602000
82,09,91,513.92402000
122,011.91,516.03402000
162,012.51,516.53002000
242,014.51,518.54002500

Ordering and delivery information

Fiber countSMPackaging
2OBOXAH02 ff 2000m (+/-5%)
4OBOXAH04 ff2000m (+/-5%)
8OBOXAH08 ff2000m (+/-5%)
12OBOXAH12 ff2000m (+/-5%)
16OBOXAH16 ff2000m (+/-5%)
24OBOXAH24 ff2000m (+/-5%)

ff = fiber type : OS2 = S2, OM1 = M1, OM1+ = E1, OM2=M2, OM3=M3, OM4=M4, OM5=M5

 

 

Other standards of reference

IEC 60092-370Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
DNV TAP 827.50/1Type Approval Program - Optical Fibre Cables
ABS SVRRules for building and classing. Steel Vessels.
ABS SMRRules for building and classing. Steel vessels under 90 meters.
IEC 60793General specifications for both multimode and single-mode optical fibres
IEC 60794general specifications for optical fibres cables

 

 

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.