AICI up to 24 fibers tight buffered, armoured metallic, LSZH, Fire Retardant IEC60332-3-22 Cat.A

Up to 24 cores tight buffered, metallic armoured SHF1, Fire Retardant IEC60332-3-22 Cat.A
OAICI0_1, 15.05.2014/AP rev.2
Type Approval: DNV-GL TAE00002VE


Print or Download PDF





Store at : -40 to +70 °C
Install at : -10 to +50 °CBend minimum : 15 times O.D.
Operate at : -30 to +70 °CBend minimum : 10 times O.D.
Crush maximum : 2000N/100mm
Impact maximum : 25J




Bare fiber : 250µm
Buffer : 900µm tight buffer
Colour code : See table
Cable core : up to 24 tight buffered fibers are stranded together. The core is filled with waterblocking glass yarns.
Inner sheath : black SHF1 material
Armour : galvanized steel, bronze or tinnerd copper wired braid. Coverage ≥80%.
Outer jacket : black SHF1 UV-Resistant material, LSZH
Marking : APS Finland – ww/mm – Fiber Optic Cable AICI “fiber count and type” – SHF1 IEC60332-3-22 Cat A – TK/lot + meter



Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas : IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Fire resistant : NO
Ozone resistant : upon request
Weather resistant : upon request
LSZH SHF2 : upon request
Oil resistant : intermittent splash – permanent resistance available upon request
MUD resistant : upon request
Water absorption : IEC60502
Water penetration : IEC 60794-1-2-F5-B (inner core only)
UV resistant : IEC60811-2-1, ASTM-D-2565-92A


Ordering and delivery information

Fiber countSMOM1OM2OM3OM4Packaging
2OAICI02S21OAICI02M11OAICI02M21OAICI02M31OAICI02M41drum 2000m (+/-5%)
4OAICI04S21OAICI04M11OAICI04M21OAICI04M31OAICI04M41drum 2000m (+/-5%)
8OAICI08S21OAICI08M11OAICI08M21OAICI08M31OAICI08M41drum 2000m (+/-5%)
12OAICI12S21OAICI12M11OAICI12M21OAICI12M31OAICI12M41drum 2000m (+/-5%)
24OAICI24S21OAICI24M11OAICI24M21OAICI24M31OAICI24M41drum 2000m (+/-5%)


Colour code of fibers

0102 03 04 05 06 07 08 09 10 11 12



Fiber countInner jacket thickness (mm)Inner jacket diameter (mm)Outer jacket thickness (mm)Cable Diameter (mm)Cable weight (kg/km)Pulling tension (N)



Other standards of reference


IEC 60092-370Electrical installations in ships: Guidance on the selection of cables for telecommunication and data.
DNV TAP 827.50/1Type Approval Program - Optical Fibre Cables
ABS SVRRules for building and classing. Steel Vessels.
ABS SMRRules for building and classing. Steel vessels under 90 meters.
IEC 60793General specifications for both multimode and single-mode optical fibres
IEC 60794general specifications for optical fibres cables




Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.