Description
Store at : -40°C ÷ +70°C
Install at : -10°C to +70°C Bend minimum : 20 times O.D.
Operate at : -40°C to +70 °C Bend minimum : 10 times O.D.
Crush maximum : 2000N/100mm
Impact maximum : 20 impacts, 5J
Torsion: ± 1 turns/ 1 m
Design
Central strength member: glass fiber reinforced plastic rod (FRP)
Tight coating : 850 ± 50 micron tight buffered optical fibres
Fibres color- code : according to EIA/TIA 598
Fillers : if necessary
Cable core : up to 16 fibres are stranded around the central strength member
Peripheral strength elements : swellable aramide yarns
Inner jacket : flame retardant LSZH compound
Metallic armor for AICI: galvanized steel wire braid (GSWB)
Metallic armor for AIOI: copper wire braid (TCWB)
Outer jacket : flame retardant LSZH compound (SHF1) UV stabilized
Marking printed : APS Finland – AICI or AIOI – FIBER OPTIC CABLE – Fiber count and type – P/N – Lot no + meter marking
Environmental properties and Fire Performances
Degree of acidity of gases :IEC 60754-1, IEC 60754-2 (pH value ≥ 4,3 and Conductivity ≤10µS/mm)
Halogen acid gas :IEC 60754-1, IEC 60754-2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission :IEC 61034-1/2
Flame retardant: IEC 60332-1-2
No-fire propagation: IEC 60332-3-24
Water penetration : IEC 60794-1-2-F5-B (< 3 m/24 hours)
Cable configuration
Fiber count | Outer diameter nom. [mm] | Cable weight [Kg/Km] | Tensile strength Inst./oper. [N] | Packaging [+/-5%] |
---|---|---|---|---|
2 | 7.8 | 88 | 500/200 | 2000 |
4 | 8.0 | 98 | 600/240 | 2000 |
8 | 9.0 | 110 | 800/350 | 2000 |
12 | 10.0 | 130 | 1000/400 | 2000 |
16 | 10.2 | 145 | 1000/400 | 2000 |
Colour code of fibers (EIA/TIA 598)
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Blue | Orange | Green | Brown | Grey | White | Red | Black | Yellow | Violet | Pink | Aqua | Blue / black | Orange / black | Green / black | Brown / black |
Ordering and delivery information
P/N : OAICIB 00 AA / OAIOIB 00 AA
00 : fiber count
02, 04, 06, 08, 12, 24, 48
AA : fiber type
G652D = S2
OM1 = M1
OM1+ = E1
OM2 = M2
OM3 = M3
OM4 = M4
OM5 = M5
Other standards of reference
IEC 60793 – IEC 60794 -1-2 – NEK 606
Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.