75 Ohm coaxial cable RG6 LSZH MIL Type

Non-armoured and armoured LSZH, Flame Retardant IEC60332-1
RG6MT, 23.11.2017/AP rev.0


Print or Download PDF





Store at: -0 to +60 °C
Install at: 0 to +50 °CBend minimum: 10xO.D. (unarmored) or 20xO.D. (armored)
Operate at: -20 to +70 °CBend minimum: 5xO.D. (unarmored) or 15xO.D. (armored)




Conductor : bare copper Ø 1.02mm nominal
Dielectric : low density polyethylene nominal Ø 4.60mm
Screen 1 : aluminium tape
Screen 2 : aluminium wire braid 
Outer jacket : black LSZH material
Marking : APS Finland – ww/yy – RG 6 type MIL LSZH – 75 OHM – lot + meter

Armoured version is supplied with additional:
Armour : galvanized steel or tinned copper wire braid
Outer jacket : black LSZH material
Marking : APS Finland – ww/yy – ARMOURED RG 6 type MIL LSZH – 75 OHM – lot + meter


Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 
Halogen acid gas corrosiveness : TS EN 50267-2-3
Smoke Emission : IEC 61034-2
Flame retardant : IEC 60332-1-1, IEC60332-2-1

Electrical characteristics

Impedance : 75 ± 3 ᘯ 
Capacitance : 53pF/m nominal
Insulation resistance :  10000 MΩ x Km

Spark tension of the sheath : 2.0 kV


Attenuation (typical)



Ordering and delivery information

TypeP/NO.D [mm]Weight [kg/km]Packaging
RG6 Non-armouredRG6MT7.0110500m or 1000m (+/-5%)
RG6 armoured GSWB RG6MTBH11.2197500m (+/-5%)
RG6 armoured TCWB RG6MTTH11.2183500m (+/-5%)






Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.