50 Ohm connector BNC

BNC50, Rev.00, Date 2018-01-02

Print or Download PDF




  • Straight and right angle
  • For flexible, semi-flex and semi-rigid cables
  • PCB connectors (straight and right angle)
  • Panel connectors in various flanges
  • Adapters



  • Cable Assembly
  • Antenna, CATV, Satcom
  • Automotive
  • Medical Equipment
  • Radios, Telecommunications, Base Stations
  • Instrumentation



Body, coupling nut   Brass, Zinc alloy(diecast)
Insulator   Teflon, Delrin
Center contact   Brass for male / Beryllium copper or Phosphor bronze for female
Crimping sleeve   Annealed Brass
Body plating   Nickel (Ni)
Center contact plating   Gold (Au)


Electrical Characteristics

Impedance   50 Ohm
Frequency range   0-4 GHz

VSWR   Straight type ≤ 1.3 max
Dielectric withstanding voltage   1500 V rms
Working voltage   500 V rms
Center contact resistance   ≤ 1.5 mΩ (Milliohms max.)

Outer contact resistance   ≤ 2.0 mΩ (Milliohms max.)
Insulation resistance   ≥ 5000 MΩ (Megohms min.)


Mechanical Characteristics

Coupling   2-stud bayonet
Contact Retention   100 lbs. min.
Vibration   MIL-STD-202 Meth. 204
Corrosion resistance   MIL-STD-202 Meth. 101


Environmental Characteristics

Temperature Range   Teflon −65ºC ~ +85 ºC
Coupling nut retention   100 lbs. min.
Vibration   MIL-STD-202 Meth. 204
Corrosion resistance   MIL-STD-202 Meth. 101


Note : all characteristics and values are typical.

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.