LIACC Self-supporting aerial cable Figure-8, Multitube, Armoured, Mid Span (50m)

    
*All images are indicative

 

Features

Aerial installation
Metallic supporting wire
Waterproof
Metallic armour and moisture protection
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at  -10 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -40 to +70 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with jelly housing up to 12 fibers (typical ø 2.0mm)
Central member :  FRP
Assembling :  tubes and fillers assembled together according to “Colour Code” table. The core is filled with jelly compound.
Wrapping :  water blocking tape (or polyester tape).
Peripheral elements :  glass yarns.
Inner jacket :  Black PE material, typical thickness 1.5-1.8mm
Metallic protection :  Corrugated steel tape (H9) or Aluminium Moisture Barrier (H5)

Messenger wire :  steel 7×1.52mm 
Outer jacket :  Black HDPE material, UV resistant
Marking :  APS Finland – ww/yy – Aerial Fiber Optic Cable AKE8950 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension (short term) :  3500 N
Pulling tension (long term) :  1200 N
Maximum span :  50m
Crush :  4000N/100mm

Impact :  15J 
Water penetration :  3m cable, 1m water, 24 hours 

 

 

Colour code of tubes and fibers

  1 2 3 4 5 6 7 8 9 10 11 12
Tube Colours Blue Orange Green Brown Grey White (natural) Red Black Yellow Violet Pink Aqua
Fiber Colours Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Fillers Black or Grey

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
2 AKE895002 ff h oo 1 2 5 5.5 x 13.9 345 Drum (2 or 4km)
4 AKE895004 ff h oo 1 4 5 5.5 x 13.9 346 Drum (2 or 4km)
8 AKE895008 ff h oo 1 8 5 5.5 x 13.9 346 Drum (2 or 4km)
12 AKE895012 ff h oo 1 12 5 5.5 x 13.9 346 Drum (2 or 4km)
24 AKE895024 ff h oo 2 12 4 5.5 x 13.9 346 Drum (2 or 4km)
48 AKE895048 ff h oo 4 12 2 5.5 x 13.9 347 Drum (2 or 4km)
72 AKE895072 ff h oo 6 12 0 5.5 x 14.6 367 Drum (2 or 4km)
96 AKE895096 ff h oo 8 12 0 5.5 x 16.0 444 Drum (2 or 4km)
144 AKE8950144 ff h oo 12 12 0 5.5 x 16.0 533 Drum (2 or 4km)

ff = fiber type                   ex. OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
h = metallic protection     ex. corrugated steel tape = 9, aluminium moisture barrier = 5

oo = delivery length         ex. 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC Self-supporting aerial cable Figure-8, Multitube, Armoured, Mid Span (60m)

    
*All images are indicative

 

Features

Aerial installation
Metallic supporting wire
Waterproof
Metallic armour and moisture protection
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at  -10 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -40 to +70 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with jelly housing up to 12 fibers (typical ø 2.0mm)
Central member :  FRP
Assembling :  tubes and fillers assembled together according to “Colour Code” table. The core is filled with jelly compound.
Wrapping :  water blocking tape (or polyester tape).
Peripheral elements :  glass yarns.
Inner jacket :  Black PE material, typical thickness 1.5-1.8mm
Metallic protection :  Corrugated steel tape (H9) or Aluminium Moisture Barrier (H5)

Messenger wire :  steel 7×1.75mm 
Outer jacket :  Black HDPE material, UV resistant
Marking :  APS Finland – ww/yy – Aerial Fiber Optic Cable AKE8960 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension (short term) :  5000 N
Pulling tension (long term) :   1500 N
Maximum span :  60m
Crush :  4000N/100mm

Impact :  15J 
Water penetration :  3m cable, 1m water, 24 hours 

 

 

Colour code of tubes and fibers

  1 2 3 4 5 6 7 8 9 10 11 12
Tube Colours Blue Orange Green Brown Grey White (natural) Red Black Yellow Violet Pink Aqua
Fiber Colours Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Fillers Black or Grey

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
2 AKE896002 ff h oo 1 2 5 5.5 x 13.9 345 Drum (2 or 4km)
4 AKE896004 ff h oo 1 4 5 5.5 x 13.9 346 Drum (2 or 4km)
8 AKE896008 ff h oo 1 8 5 5.5 x 13.9 346 Drum (2 or 4km)
12 AKE896012 ff h oo 1 12 5 5.5 x 13.9 346 Drum (2 or 4km)
24 AKE896024 ff h oo 2 12 4 5.5 x 13.9 346 Drum (2 or 4km)
48 AKE896048 ff h oo 4 12 2 5.5 x 13.9 347 Drum (2 or 4km)
72 AKE896072 ff h oo 6 12 0 5.5 x 14.6 367 Drum (2 or 4km)
96 AKE896096 ff h oo 8 12 0 5.5 x 16.0 444 Drum (2 or 4km)
144 AKE8960144 ff h oo 12 12 0 5.5 x 16.0 533 Drum (2 or 4km)

ff = fiber type                   ex. OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
h = metallic protection     ex. corrugated steel tape = 9, aluminium moisture barrier = 5

oo = delivery length         ex. 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC Self-supporting aerial cable Figure-8, Multitube, Mid Span (40m)

    
*All images are indicative

 

Features

Aerial installation
Metallic supporting wire
Waterproof
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at  -10 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -40 to +70 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with jelly housing up to 12 fibers (typical ø 2.0mm)
Central member :  FRP or steel
Assembling :  tubes and fillers assembled together according to “Colour Code” table. The core is filled with jelly compound.
Wrapping :  water blocking tape.
Peripheral elements :  aramide yarns.
Core jacket :  Black PE material, typical thickness 1.5-1.8mm.

Messenger wire :  steel 7×0.8mm (alt. 7×0.92mm).
Outer jacket :  Black HDPE material, UV resistant
Marking :  APS Finland – ww/yy – Aerial Fiber Optic Cable AKE840 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension (short term) :  3000 N
Pulling tension (long term) :  700 N
Maximum span :  40m
Crush :  3000N/100mm

Impact :  15J 
Water penetration :  3m cable, 1m water, 24 hours 

 

 

Colour code of tubes and fibers

  1 2 3 4 5 6 7 8 9 10 11 12
Tube Colours Blue Orange Green Brown Grey White (natural) Red Black Yellow Violet Pink Aqua
Fiber Colours Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Fillers Black or Grey

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
2 AKE84002 ff oo 1 2 5 3.2 x 7.2 157 Drum (2 or 4km)
4 AKE84004 ff oo 1 4 5 3.2 x 7.2 157 Drum (2 or 4km)
8 AKE84008 ff oo 1 8 5 3.2 x 7.2 157 Drum (2 or 4km)
12 AKE84012 ff oo 1 12 5 3.2 x 7.2 157 Drum (2 or 4km)
24 AKE84024 ff oo 2 12 4 3.2 x 7.2 157 Drum (2 or 4km)
48 AKE84048 ff oo 4 12 2 3.2 x 7.2 157 Drum (2 or 4km)
72 AKE84072 ff oo 6 12 0 3.2 x 7.2 172 Drum (2 or 4km)
96 AKE84096 ff oo 8 12 0 3.2 x 10.8 223 Drum (2 or 4km)
144 AKE840144 ff oo 12 12 0 3.2 x 12.6 245 Drum (2 or 4km)

ff = fiber type                  ex. OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
oo = delivery length         ex. 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC Self-supporting aerial cable Figure-8, Multitube, Mid Span (50m)

    
*All images are indicative

 

Features

Aerial installation
Metallic supporting wire
Waterproof
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at  -10 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -40 to +70 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with jelly housing up to 12 fibers (typical ø 2.0mm)
Central member :  FRP or steel
Assembling :  tubes and fillers assembled together according to “Colour Code” table. The core is filled with jelly compound.
Wrapping :  water blocking tape.
Peripheral elements :  aramide yarns.
Core jacket :  Black PE material, typical thickness 1.5-1.8mm.

Messenger wire :  steel 7×1.12mm
Outer jacket :  Black HDPE material, UV resistant
Marking :  APS Finland – ww/yy – Aerial Fiber Optic Cable AKE850 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension (short term) :  3500 N
Pulling tension (long term) :  1200 N
Maximum span :  50m
Crush :  3000N/100mm

Impact :  15J 
Water penetration :  3m cable, 1m water, 24 hours 

 

 

Colour code of tubes and fibers

  1 2 3 4 5 6 7 8 9 10 11 12
Tube Colours Blue Orange Green Brown Grey White (natural) Red Black Yellow Violet Pink Aqua
Fiber Colours Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Fillers Black or Grey

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
2 AKE85002 ff oo 1 2 5 3.2 x 7.2 157 Drum (2 or 4km)
4 AKE85004 ff oo 1 4 5 3.2 x 7.2 157 Drum (2 or 4km)
8 AKE85008 ff oo 1 8 5 3.2 x 7.2 157 Drum (2 or 4km)
12 AKE85012 ff oo 1 12 5 3.2 x 7.2 157 Drum (2 or 4km)
24 AKE85024 ff oo 2 12 4 3.2 x 7.2 157 Drum (2 or 4km)
48 AKE85048 ff oo 4 12 2 3.2 x 7.2 157 Drum (2 or 4km)
72 AKE85072 ff oo 6 12 0 3.2 x 7.2 172 Drum (2 or 4km)
96 AKE85096 ff oo 8 12 0 3.2 x 10.8 223 Drum (2 or 4km)
144 AKE850144 ff oo 12 12 0 3.2 x 12.6 245 Drum (2 or 4km)

ff = fiber type                  ex. OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
oo = delivery length         ex. 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC Self-supporting aerial cable Figure-8, Singletube, Mid Span (60m)

    
*All images are indicative

 

Features

Aerial installation
Metallic supporting wire
Waterproof
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at  -10 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -40 to +70 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with jelly housing up to 24 fibers (typical ø 3.5mm)
Protection :  aluminium moisture barrier coated with PE foil or corrugated steel tape.
Core jacket :  Black PE material, typical thickness 1.5mm.

Messenger wire :  steel 7×1.2mm
Outer jacket :  Black HDPE material, UV resistant
Marking :  APS Finland – ww/yy – Aerial Fiber Optic Cable ASE860 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension (short term) :  3000 N
Pulling tension (long term) :  1000 N
Maximum span :  60m
Crush :  2000N/100mm

Impact :  10J 
Water penetration :  3m cable, 1m water, 24 hours 

 

 

Colour code of tubes and fibers

Option 1 – 2×12
1 2 3 4 5 6 7 8 9 10 11 12
Bundle A Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
13 14 15 16 17 18 19 20 21 22 23 24
Bundle B Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua

Option 2 – 1×24
1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
13 14 15 16 17 18 19 20 21 22 23 24
Blue/black Orange/black Green/black Brown/black Grey/black White/black Red/black Natural Yellow/black Violet/black Pink/black Aqua/black

 

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Nominal O.D. (mm) Weight (kg/km) Packaging
2 ASE86002 ff h oo 1 2 5.5 x 7.0 105 Drum (2 or 4km)
4 ASE86004 ff h oo 1 4 5.5 x 7.0 105 Drum (2 or 4km)
8 ASE86008 ff h oo 1 8 5.5 x 7.0 105 Drum (2 or 4km)
12 ASE86012 ff h oo 1 12 5.5 x 7.0 105 Drum (2 or 4km)
16 ASE86016 ff h oo 1 16 5.5 x 7.0 105 Drum (2 or 4km)
24 ASE86024 ff h oo 1 24 5.5 x 7.0 105 Drum (2 or 4km)

ff = fiber type                  ex. OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
h = protection type         ex. aluminium tape = 5, corrugated steel tape = 9 

oo = delivery length        ex. 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access cable ADSS 2-144 cores, Mid Span 200m

    
*All images are indicative

 

Features

Aerial installation on HT power lines
All Dielectric Non-Metallic design
Waterproof
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at  -10 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -40 to +70 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with jelly (nominal dial. 2.5 ± 0.1mm)
Central member :  FRP (nominal diameter 2.0mm).
Assembling :  tubes and fillers assembled together according to “Colour Code” table
Wrapping :  water blocking tape.
inner jacket :  Black MDPE material

Peripheral element :  aramide yarns with ripcord.
Outer jacket :  Black HDPE material, UV resistant
Marking :  APS Finland – ww/yy – Fiber Optic Cable ADSS MT200 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Tensile strength :  16.20 kN
Max allowed tension :  6.48 kN
Daily max tension :  4.05 kN
Permission tension :  9.72 kN
Young modulus :  12.52 kN/mm²
Maximum span :  200m
Crush :  3000N/100mm (Δα reversible, IEC 60794-1-2-E3)
Impact :  15J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)
Heat expansion :  5.28 l/°C
CSA :  112.70 mm²

 

 

Colour code of tubes and fibers

  1 2 3 4 5 6 7 8 9 10 11 12
Tube Colours Blue Orange Green Brown Grey White (natural) Red Black Yellow Violet Pink Aqua
Fiber Colours Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Fillers Black or Grey

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
2 MT20002xxMSPoo 1 2 5 12.0 117 Drum (2km)
4 MT20004xxMSPoo 1 4 5 12.0 117 Drum (2km)
8 MT20008xxMSPoo 1 8 5 12.0 117 Drum (2km)
12 MT200121xxMSPoo 1 12 5 12.0 117 Drum (2km)
12 MT200122xxMSPoo 2 6 4 12.0 117 Drum (2km)
24 MT20024xxMSPoo 2 12 4 12.0 117 Drum (2km)
48 MT20048xxMSPoo 4 12 2 12.0 117 Drum (2km)
72 MT20072xxMSPoo 6 12 0 12.0 117 Drum (2km)
96 MT20096xxMSPoo 8 12 0 12.0 117 Drum (2km)
144 MT20144xxMSPoo 12 12 0 12.0 117 Drum (2km)

xx = fiber type                  ex. OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4
oo = delivery length         ex. 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access cable ADSS 2-72 cores, Mid Span 280m

    
*All images are indicative

 

Features

Aerial installation on HT power lines
All Dielectric Non-Metallic design
Waterproof
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at  -10 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -40 to +70 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with jelly (nominal dial. 2.5 ± 0.1mm)
Central member :  FRP (nominal diameter 2.0mm).
Assembling :  tubes and fillers assembled together according to “Colour Code” table
Wrapping :  water blocking tape.
inner jacket :  Black MDPE material

Peripheral element :  aramide yarns with ripcord.
Outer jacket :  Black HDPE material, UV resistant
Marking :  APS Finland – ww/yy – Fiber Optic Cable ADSS MT80 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension :  8000 N (Δα reversible, IEC 60794-1-2-E1)
Nominal span :  160m
Maximum span :  280m
Crush :  3000N/100mm (Δα reversible, IEC 60794-1-2-E3)

Impact :  15J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

 

 

Colour code of tubes and fibers

  1 2 3 4 5 6 7 8 9 10 11 12
Tube Colours Blue Orange Green Brown Grey White (natural) Red Black Yellow Violet Pink Aqua
Fiber Colours Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Fillers Black or Grey

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
2 MT8002xxMSPoo 1 2 5 14.0 145 Drum (2 or 4km)
4 MT8004xxMSPoo 1 4 5 14.0 145 Drum (2 or 4km)
8 MT8008xxMSPoo 1 8 5 14.0 145 Drum (2 or 4km)
12 MT80121xxMSPoo 1 12 5 14.0 145 Drum (2 or 4km)
12 MT80122xxMSPoo 2 6 4 14.0 145 Drum (2 or 4km)
24 MT8024xxMSPoo 2 12 4 14.0 145 Drum (2 or 4km)
48 MT8048xxMSPoo 4 12 2 14.0 145 Drum (2 or 4km)
72 MT8072xxMSPoo 6 12 0 14.0 145 Drum (2 or 4km)

xx = fiber type                  ex. OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4
oo = delivery length         ex. 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access Duct cable type MTE15 12-288 cores, multitube

    
*All images are indicative

 

Features

Small diameter and light weight
All Dielectric Non-Metallic design
Waterproof
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication, MAN, WAN
FTTx backbone and access

 

Installation Features

Store at  -40 to +70 °C
Install at  -30 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -30 to +60 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with thixotropic jelly 
Central element :  non-metallic FRP rod
Ripcord :  1 yarn

Outer jacket :
  Black HDPE material UV-Resistant
Marking :  APS Finland – ww/yy – Fiber Optic Cable MTE15 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension in installation :  1500N
Pulling tension in operation :  600N
Crush (short term) :  1000N
Crush (long term) :  300N

Impact :  1Nm, 3 impacts, R=300mm (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (no leakage, IEC 60794-1-2-F5B)

 

 

Colour code of tubes and fibers

                               
Tube layer 1 1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Slate White Red Black Yellow Violet Rose Aqua
Tube layer 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Blue Orange Green Brown Slate White Red Black Yellow Violet Rose Aqua Blue Orange Green
Fibers 1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Slate White Red Black Yellow Violet Rose Aqua
Fibers 13 14 15 16 17 18 19 20 21 22 23 24
Blue/black Orange/black Green/black Brown/black Slate/black White/black Red/black Natural Yellow/black Violet/black Rose/black Aqua/black

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
12 MTE15012 xx E oo 1 12 5 9.8 65 Drum (2km)
24 MTE15024 xx E oo 2 12 4 9.8 65 Drum (2km)
36 MTE15036 xx E oo 3 12 3 9.8 65 Drum (2km)
48 MTE15048 xx E oo 4 12 2 10.5 85 Drum (2km)
60 MTE15060 xx E oo 5 12 1 10.5 85 Drum (2km)
72 MTE15072 xx E oo 6 12 0 10.5 85 Drum (2km)
96 MTE15096 xx E oo 8 12 0 14.0 38 Drum (2km)
144 MTE15144 xx E oo 12 12 0 18.0 185 Drum (2km)

xx = fiber type
ex. OS2=S2, G657A1 = A1, G657B1 = B1, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5

oo = delivery length        
ex. 2000m=D2, 4000m=D4 (tolerance ±5%)

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access Duct Dielectric cable type UDD2 up to 24 cores, single tube

    
*All images are indicative

 

Features

Small diameter and very light weight
All Dielectric Non-Metallic design
Waterproof
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication, MAN, WAN
FTTx backbone and access
Interconnection of distribution boxes, frames and panels at customer’s side

 

Installation Features

Store at  -40 to +70 °C
Install at  -30 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -30 to +70 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with thixotropic jelly (typical diam. 2.8mm)
Strength elements :  2 x FRP rods inside the outer jacket
Peripheral elements :  glass yarns with ripcord
Outer jacket :
  Black HDPE material UV-Resistant
Marking :  APS Finland – ww/yy – Fiber Optic Cable UDD2 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension in installation :  700N (Δα reversible, IEC 60794-1-2-E1)
Pulling tension in operation :  200N (Δα reversible, IEC 60794-1-2-E1)
Crush :  200N/100mm, max 15 min. (Δα reversible, IEC 60794-1-2-E3)

Impact :  1Nm, 3 impacts, R=300mm (Δα reversible, IEC 60794-1-2-E4)
Torsion :  1m, 100N, +/-180°, 10 cycles (Δα reversible, IEC 60794-1-2-E7)
Repeated bending :  R=20xOD, 100N, 35 cycles (Δα reversible, IEC 60794-1-2-E6)
Bending radius :  R=20xOD, 4 turns, 3 cycles (Δα reversible, IEC 60794-1-2-E11)
Temperature cycling :  -40°C to +70°C, (Δα reversible, IEC 60794-1-2-F1)

Water penetration :  3m cable, 1m water, 24 hours (no leakage, IEC 60794-1-2-F5B)

 

 

Colour code of tubes and fibers

                         
Tube 1
Natural
Fibers Option 1 1×24
1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
13 14 15 16 17 18 19 20 21 22 23 24
Blue/black Orange/black Green/Black Brown/black Grey/black White/black Red/black Natural Yellow/black Violet/black Pink/black Aqua/black
Fibers Option 2 2×12
Bundle A 1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Bundle B 13 14 15 16 17 18 19 20 21 22 23 24
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
2 (option 1) UDD21 02 xx Eoo 1 2 0 7.2 42 Drum (2 or 4km)
4 (option 1) UDD21 04 xx Eoo 1 4 0 7.2 42 Drum (2 or 4km)
8 (option 1) UDD21 08 xx Eoo 1 8 0 7.2 42 Drum (2 or 4km)
12 (option 1) UDD21 12 xx Eoo 1 12 0 7.2 42 Drum (2 or 4km)
24 (option 1) UDD21 24 xx Eoo 1 24 0 7.2 42 Drum (2 or 4km)
2 (option 2) UDD22 02 xx Eoo 1 2 0 7.2 42 Drum (2 or 4km)
4 (option 2) UDD22 04 xx Eoo 1 4 0 7.2 42 Drum (2 or 4km)
8 (option 2) UDD22 08 xx Eoo 1 8 0 7.2 42 Drum (2 or 4km)
12 (option 2) UDD22 12 xx Eoo 1 12 0 7.2 42 Drum (2 or 4km)
24 (option 2) UDD22 24 xx Eoo 1 24 0 7.2 42 Drum (2 or 4km)

xx = fiber type                  ex. OS2=S2, G657A1= 71, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
oo = delivery length         ex. 2000m=D2, 4000m=D4 (tolerance ±5%)

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access Duct Metallic cable type UDD2 up to 24 cores, single tube

    
*All images are indicative

 

Features

Small diameter and very light weight
Metallic strength members
Waterproof
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication, MAN, WAN
FTTx backbone and access
Interconnection of distribution boxes, frames and panels at customer’s side

 

Installation Features

Store at  -40 to +70 °C
Install at  -30 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -30 to +70 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with thixotropic jelly (typical diam. 2.8mm)
Strength elements :  2 x steel rods inside the outer jacket
Peripheral elements :  glass yarns with ripcord
Outer jacket :
  Black HDPE material UV-Resistant
Marking :  APS Finland – ww/yy – Fiber Optic Cable UDM2 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension in installation :  100N (Δα reversible, IEC 60794-1-2-E1)
Pulling tension in operation :  400N (Δα reversible, IEC 60794-1-2-E1)
Crush :  200N/100mm, max 15 min. (Δα reversible, IEC 60794-1-2-E3)

Impact :  1Nm, 3 impacts, R=300mm (Δα reversible, IEC 60794-1-2-E4)
Torsion :  1m, 100N, +/-180°, 10 cycles (Δα reversible, IEC 60794-1-2-E7)
Repeated bending :  R=20xOD, 100N, 35 cycles (Δα reversible, IEC 60794-1-2-E6)
Bending radius :  R=20xOD, 4 turns, 3 cycles (Δα reversible, IEC 60794-1-2-E11)
Temperature cycling :  -40°C to +70°C, (Δα reversible, IEC 60794-1-2-F1)

Water penetration :  3m cable, 1m water, 24 hours (no leakage, IEC 60794-1-2-F5B)

 

 

Colour code of tubes and fibers

                         
Tube 1
Natural
Fibers Option 1 1×24
1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
13 14 15 16 17 18 19 20 21 22 23 24
Blue/black Orange/black Green/Black Brown/black Grey/black White/black Red/black Natural Yellow/black Violet/black Pink/black Aqua/black
Fibers Option 2 2×12
Bundle A 1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Bundle B 13 14 15 16 17 18 19 20 21 22 23 24
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
2 (option 1) UDM21 02 xx Eoo 1 2 0 7.2 42 Drum (2 or 4km)
4 (option 1) UDM21 04 xx Eoo 1 4 0 7.2 42 Drum (2 or 4km)
8 (option 1) UDM21 08 xx Eoo 1 8 0 7.2 42 Drum (2 or 4km)
12 (option 1) UDM21 12 xx Eoo 1 12 0 7.2 42 Drum (2 or 4km)
24 (option 1) UDM21 24 xx Eoo 1 24 0 7.2 42 Drum (2 or 4km)
2 (option 2) UDM22 02 xx Eoo 1 2 0 7.2 42 Drum (2 or 4km)
4 (option 2) UDM22 04 xx Eoo 1 4 0 7.2 42 Drum (2 or 4km)
8 (option 2) UDM22 08 xx Eoo 1 8 0 7.2 42 Drum (2 or 4km)
12 (option 2) UDM22 12 xx Eoo 1 12 0 7.2 42 Drum (2 or 4km)
24 (option 2) UDM22 24 xx Eoo 1 24 0 7.2 42 Drum (2 or 4km)

xx = fiber type                  ex. OS2=S2, G657A1= 71, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
oo = delivery length         ex. 2000m=D2, 4000m=D4 (tolerance ±5%)

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access microcable HBBX 24-288 cores, multi tube

    
*All images are indicative

 

Features

Small diameter and light weight
Air-blown installation
All Dielectric Non-Metallic design
Waterproof
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication, MAN, WAN
FTTx backbone and access

 

Installation Features

Store at  -40 to +70 °C
Install at  -30 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -30 to +60 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with thixotropic jelly 
Central element :  non-metallic FRP rod, nominal Ø 1.65mm
Ripcord :  1 yarn

Outer jacket :
  Black HDPE material UV-Resistant
Marking :  APS Finland – ww/yy – Fiber Optic Cable HBBX fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension in installation :  650N >96cores, 1000N >96<144 cores (Δα reversible, IEC 60794-1-2-E1)
Pulling tension in operation :  200N (Δα reversible, IEC 60794-1-2-E1)
Crush :  700N/100mm, max 15 min. (Δα reversible, IEC 60794-1-2-E3)

Impact :  1Nm, 3 impacts, R=300mm (Δα reversible, IEC 60794-1-2-E4)
Torsion :  1m, 100N, +/-180°, 10 cycles (Δα reversible, IEC 60794-1-2-E7)
Repeated bending :  R=20xOD, 100N, 35 cycles (Δα reversible, IEC 60794-1-2-E6)
Bending radius :  R=20xOD, 4 turns, 3 cycles (Δα reversible, IEC 60794-1-2-E11)
Temperature cycling :  -40°C to +70°C, (Δα reversible, IEC 60794-1-2-F1)

Water penetration :  3m cable, 1m water, 24 hours (no leakage, IEC 60794-1-2-F5B)

 

 

Colour code of tubes and fibers

                               
Tube layer 1 1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Slate White Red Black Yellow Violet Rose Aqua
Tube layer 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Blue Orange Green Brown Slate White Red Black Yellow Violet Rose Aqua Blue Orange Green
Fibers 1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Slate White Red Black Yellow Violet Rose Aqua
Fibers 13 14 15 16 17 18 19 20 21 22 23 24
Blue/black Orange/black Green/black Brown/black Slate/black White/black Red/black Natural Yellow/black Violet/black Rose/black Aqua/black

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Tube diameter Nominal O.D. (mm) Weight (kg/km) Packaging
12 HBBX 012 xx E oo 1 12 5 1.6 6.0 31 Drum (2 or 4km)
24 HBBX 024 xx E oo 2 12 4 1.6 6.0 31 Drum (2 or 4km)
36 HBBX 036 xx E oo 3 12 3 1.6 6.0 31 Drum (2 or 4km)
48 HBBX 048 xx E oo 4 12 2 1.6 6.0 31 Drum (2 or 4km)
60 HBBX 060 xx E oo 5 12 1 1.6 6.0 31 Drum (2 or 4km)
72 HBBX 072 xx E oo 6 12 0 1.6 6.0 31 Drum (2 or 4km)
96 HBBX 096 xx E oo 8 12 0 1.6 7.2 38 Drum (2 or 4km)
120 HBBX 120 xx E oo 10 12 0 1.6 8.3 49 Drum (2 or 4km)
144 HBBX 144 xx E oo 12 12 0 1.6 8.3 50 Drum (2 or 4km)
192 HBBX 192 xx E oo 8 24 0 2.3 9.8 68 Drum (2 or 4km)
288 HBBX 288 xx E oo 12 24 0 2.3 13.0 119 Drum (2 or 4km)

xx = fiber type
ex. OS2=S2, G657A1 = A1, G657B1 = B1, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5

oo = delivery length        
ex. 2000m=D2, 4000m=D4 (tolerance ±5%)

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access microcable VBBX 2-24 cores, single tube

    
*All images are indicative

 

Features

Very small diameter and very light weight
Air-blown installation
All Dielectric Non-Metallic design
Waterproof
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication, MAN, WAN
FTTx backbone and access

 

Installation Features

Store at  -40 to +70 °C
Install at  -30 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -30 to +60 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with thixotropic jelly (typical diam. 2.8mm)
Peripheral element :  aramide yarns with ripcord
Outer jacket :
  Black HDPE material UV-Resistant
Marking :  APS Finland – ww/yy – Fiber Optic Cable VBBX fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension in installation :  650N (Δα reversible, IEC 60794-1-2-E1)
Pulling tension in operation :  200N (Δα reversible, IEC 60794-1-2-E1)
Crush :  200N/100mm, max 15 min. (Δα reversible, IEC 60794-1-2-E3)

Impact :  1Nm, 3 impacts, R=300mm (Δα reversible, IEC 60794-1-2-E4)
Torsion :  1m, 100N, +/-180°, 10 cycles (Δα reversible, IEC 60794-1-2-E7)
Repeated bending :  R=20xOD, 100N, 35 cycles (Δα reversible, IEC 60794-1-2-E6)
Bending radius :  R=20xOD, 4 turns, 3 cycles (Δα reversible, IEC 60794-1-2-E11)
Temperature cycling :  -40°C to +70°C, (Δα reversible, IEC 60794-1-2-F1)

Water penetration :  3m cable, 1m water, 24 hours (no leakage, IEC 60794-1-2-F5B)

 

 

Colour code of tubes and fibers

                         
Tube 1
Natural
Fibers Option 1 1×24
1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
13 14 15 16 17 18 19 20 21 22 23 24
Blue/black Orange/black Green/Black Brown/black Grey/black White/black Red/black Natural Yellow/black Violet/black Pink/black Aqua/black
Fibers Option 2 2×12
Bundle A 1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Bundle B 13 14 15 16 17 18 19 20 21 22 23 24
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
2 (option 1) VBBX1 02 xx Eoo 1 2 0 3.8 13 Drum (2 or 4km)
4 (option 1) VBBX1 04 xx Eoo 1 4 0 3.8 13 Drum (2 or 4km)
8 (option 1) VBBX1 08 xx Eoo 1 8 0 3.8 13 Drum (2 or 4km)
12 (option 1) VBBX1 12 xx Eoo 1 12 0 3.8 13 Drum (2 or 4km)
24 (option 1) VBBX1 24 xx Eoo 1 24 0 4.8 20 Drum (2 or 4km)
2 (option 2) VBBX2 02 xx Eoo 1 2 0 3.8 13 Drum (2 or 4km)
4 (option 2) VBBX2 04 xx Eoo 1 4 0 3.8 13 Drum (2 or 4km)
8 (option 2) VBBX2 08 xx Eoo 1 8 0 3.8 13 Drum (2 or 4km)
12 (option 2) VBBX2 12 xx Eoo 1 12 0 3.8 13 Drum (2 or 4km)
24 (option 2) VBBX2 24 xx Eoo 1 24 0 4.8 20 Drum (2 or 4km)

xx = fiber type                  ex. OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
oo = delivery length         ex. 2000m=D2, 4000m=D4 (tolerance ±5%)

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access cable ADSS 2-12 cores, Short Span 80m (ADSS-CT25)

    
*All images are indicative

 

Features

Aerial installation on HT power lines
All Dielectric Non-Metallic design
Waterproof
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at  -10 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -40 to +70 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with jelly
Peripheral element :  aramide yarns with ripcord.
Outer jacket :  Black HDPE material, UV resistant
Marking :  APS Finland – ww/yy – Fiber Optic Cable ADSS CT25 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension :  2500 N (Δα reversible, IEC 60794-1-2-E1)
Nominal span :  50m
Maximum span :  80m
Wind :  <30m
Crush :  1000N/100mm (Δα reversible, IEC 60794-1-2-E3)

Impact :  5J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

 

 

Colour code of fibers

 

Option 1
1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
13 14 15 16 17 18 19 20 21 22 23 24
Blue/black Orange/black Green/black Brown/black Grey/black White/black Red/black Natural Yellow/black Violet/black Pink/black Aqua/black

Option 2
1 2 3 4 5 6 7 8 9 10 11 12
Bundle A Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
13 14 15 16 17 18 19 20 21 22 23 24
Bundle B Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua

 

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
2 CT2502xxASPoo 1 2 0 9.0 80 Drum 2 or 4 km
4 CT2504xxASPoo 1 4 0 9.0 80 Drum 2 or 4 km
8 CT2508xxASPoo 1 8 0 9.0 80 Drum 2 or 4 km
12 CT2512xxASPoo 1 12 0 9.0 80 Drum 2 or 4 km

xx = fiber type                  ex. OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4
oo = delivery length         ex. 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access cable ADSS 2-144 cores, Short Span 120m (ADSS-MT30)

    
*All images are indicative

 

Features

Aerial installation on HT power lines
All Dielectric Non-Metallic design
Waterproof
HDPE and UV-Resistant outer jacket

 

Standards of reference and applications

IEC 60793, IEC 60794-1, IEC60794-3-20, ANSI/ICEA S-104-696, EN 187105, Telcordia GR-20 | Telcordia GR-409
Intrabuilding Voice and Data/LAN Communication Networks
Telecommunication
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at  -10 to +60 °C, Bend minimum  20 times O.D. 
Operate at  -40 to +70 °CBend minimum  15 times O.D. 

 

Design

Optical fiber :  125/250μm Single Mode or Multi Mode
Buffer :  PBTP loose tube filled with jelly (nominal dial. 2.5 ± 0.1mm)
Central member :  FRP (nominal diameter 2.0mm).
Assembling :  tubes and fillers assembled together according to “Colour Code” table
Wrapping :  water blocking tape.
Peripheral element :  aramide yarns with ripcord.
Outer jacket :  Black HDPE material, UV resistant
Marking :  APS Finland – ww/yy – Fiber Optic Cable ADSS MT30 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension :  3000 N (Δα reversible, IEC 60794-1-2-E1)
Nominal span :  50m
Maximums Span :  120m
Crush :  2000N/100mm (Δα reversible, IEC 60794-1-2-E3)

Impact :  10J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

 

 

Colour code of tubes and fibers

  1 2 3 4 5 6 7 8 9 10 11 12
Tube Colours Blue Orange Green Brown Grey White (natural) Red Black Yellow Violet Pink Aqua
Fiber Colours Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Fillers Black or Grey

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
2 MT3002xxASPoo 1 2 5 11.0 110 Drum
4 MT3004xxASPoo 1 4 5 11.0 110 Drum
8 MT3008xxASPoo 1 8 5 11.0 110 Drum
12 MT30121xxASPoo 1 12 5 11.0 110 Drum
12 MT3012xxASPoo 2 6 4 11.0 110 Drum
24 MT3024xxASPoo 2 12 4 11.0 110 Drum
48 MT3048xxASPoo 4 12 2 11.0 110 Drum
72 MT3072xxASPoo 6 12 0 11.0 110 Drum
96 MT3096xxASPoo 8 12 0 15.0 120 Drum
144 MT30144xxASPoo 12 12 0 16.0 135 Drum

xx = fiber type                  ex. OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4
oo = delivery length         ex. 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access cable MTE 24-144 cores, Outdoor, 4000N

*All images are indicative
  

Features

Outdoor and duct installation
All Dielectric Non-Metallic design
Light weight

 

Standards of reference and applications

IEC 60793, IEC 60794
Intrabuilding Voice and Data/LAN Communication Networks
Installation in Ducts & Conduits
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at  -5 to +50 °C, Bend minimum  20 times O.D. 
Operate at  -40 to +70 °C, Bend minimum  10 times O.D. 

 

Design

Optical fiber : 125/250μm Single Mode or Multi Mode
Buffer : PBTP loose tube filled with jelly (nominal diameter 2.0mm).
Central member : FRP (nominal diameter 2.5mm).
Assembling : tubes and fillers assembled together according to “Colour Code” table
Wrapping :  water blocking tape.
Protection :  anti-rodent glass yarns.
Rip cord :  under the outer jacket.

Outer jacket : Black HDPE material, UV resistant (nominal thickness 1.5mm)
Marking : APS Finland – ww/yy – Fiber Optic Cable  MTE40  fiber count x fiber type – P/N – lot + meter

 

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension :  4000 N (Δα reversible, IEC 60794-1-2-E1)
Crush :  2000N/100mm (Δα reversible, IEC 60794-1-2-E3)
Impact :  3J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

 

Colour code of tubes and fibers

  1 2 3 4 5 6 7 8 9 10 11 12
Tube Colours Blue Orange Green Brown Grey White (natural) Red Black Yellow Violet Pink Aqua
Fiber Colours Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Fillers Black or Grey

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers O.D. (mm) Weight (kg/km) Packaging
24 MTE4024xxoo 2 12 4 9.5 95 Drum
48 MTE4048xxoo 4 12 2 9.5 95 Drum
72 MTE4072xxoo 6 12 0 12.0 130 Drum
96 MTE4096xxoo 8 12 0 12.0 130 Drum
144 MTE40A4xxoo 12 12 0 12.0 130 Drum

xx = fiber type                  ex. OS2=S2, G657A1 = A1, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
oo = delivery length         ex. 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access cable MTE15 2-144 cores, Outdoor, 1500N (GYFTY)

[et_pb_section admin_label=”section”]
[et_pb_row admin_label=”row”]
[et_pb_column type=”4_4″]
[et_pb_text admin_label=”Text”]

  
*All images are indicative

Features

Outdoor and duct installation
All Dielectric Non-Metallic design
Light weight

 

Standards of reference and applications

IEC 60793, IEC 60794
Intrabuilding Voice and Data/LAN Communication Networks
Installation in Ducts & Conduits
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at  -5 to +50 °C, bend minimum  20 times O.D.
Operate at  -40 to +60 °C, bend minimum  10 times O.D. (static)

 

Design

Optical fiber : 125/250μm Single Mode or Multi Mode
Buffer : PBTP loose tube filled with jelly (nominal diameter 2.3mm).
Central member : FRP (nominal diameter 2.0mm).
Assembling : tubes and fillers assembled together according to “Colour Code” table
Wrapping :  water blocking tape.
Outer jacket : Black HDPE material, UV resistant (nominal thickness 1.8mm)
Marking : APS Finland – ww/yy – Fiber Optic Cable MTE15 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension (short term):  1500 N
Pulling tension (long term):  600 N
Crush :  1000N/100mm
Impact :  5J
Water penetration :  3m cable, 1m water, 24 hours

 

Colour code of tubes and fibers

  1 2 3 4 5 6 7 8 9 10 11 12
Tube Colours Blue Orange Green Brown Grey White (natural) Red Black Yellow Violet Pink Aqua
Fiber Colours Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
Fillers Black or Grey

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers O.D. (mm) Weight (kg/km) Packaging
2 MTE1502xxoo 1 2 5 9.5 95 Drum
4 MTE1504xxoo 1 4 5 9.5 95 Drum
8 MTE1508xxoo 1 8 5 9.5 95 Drum
12 MTE1512xxoo 1 12 5 9.5 95 Drum
24 MTE15243xxoo 3 8 3 9.5 95 Drum
24 MTE15242xxoo 2 12 4 9.5 95 Drum
48 MTE1548xxoo 4 12 2 9.5 95 Drum
72 MTE1572xxoo 6 12 0 12.0 130 Drum
96 MTE1596xxoo 8 12 0 12.0 130 Drum
144 MTE15144xxoo 12 12 0 14.0 155 Drum

xx = fiber type                  ex. OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4
oo = delivery length         ex. 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

[/et_pb_text]
[/et_pb_column]
[/et_pb_row]
[/et_pb_section]


LIACC FO Access cable MT189E 2-144 cores, Armoured, Direct Burial, 1800N

  
*All images are indicative

Features

Outdoor and duct installation
Metallic armour and moisture barrier (corrugated steel tape)
Compact and light weight

 

Standards of reference and applications

IEC 60793, IEC 60794
Intrabuilding Voice and Data/LAN Communication Networks
Outside Plant
Building access in FTTx networks

 

Installation Features

Store at  -30 to +70 °C
Install at  -5 to +50 °C, Bend minimum 20 times O.D. (installation)
Operate at  -45 to +70 °CBend minimum 15 times O.D. (static)

 

Design

Optical fiber : 125/250μm Single Mode or Multi Mode
Buffer : PBTP loose tube filled with jelly, housing up to 12 fibers
Cable core :  up to 12 tubes stranded together into a compact core, jelly filled
Protection :  glass yarns with wrapping waterblocking tape
Armour:  corrugated steel tape
Outer jacket : Black HDPE material, UV resistant 
Marking : APS Finland – ww/yy – Armoured Fiber Optic Cable MT189E fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension :  1800 N (Δα reversible, IEC 60794-1-2-E1)
Crush :  1000N/100mm (Δα reversible, IEC 60794-1-2-E3)
Impact :  10J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

 

Colour code of fibers

1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua

 

Colour code of tubes

1 2 3 4 5 6 7 8 9 10 11 12 Fillers
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua Black

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
2 MT189E02xxoo 1 2 5 10.2 126 Drum
4 MT189E04xxoo 1 4 5 10.2 126 Drum
8 MT189E08xxoo 1 8 5 10.2 126 Drum
12 MT189E12xxoo 1 12 5 10.2 126 Drum
24 MT189E24xxoo 2 12 4 10.2 126 Drum
36 MT189E36xxoo 3 12 3 10.2 126 Drum
48 MT189E48xxoo 4 12 2 10.2 126 Drum
72 MT189E72xxoo 6 12 10.2 126 Drum
144 MT189EA4xxoo 12 12 15.0 169 Drum

xx = fiber type                  OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, M5=OM5
oo = delivery length         2000m=D2

 

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access cable MT209EG 2-144 cores, Armoured, Direct Burial, 2000N (GYTS)

  
*All images are indicative

Features

Outdoor and duct installation
Metallic armour and moisture barrier (corrugated steel tape)
Compact and light weight

 

Standards of reference and applications

IEC 60793, IEC 60794
Intrabuilding Voice and Data/LAN Communication Networks
Outside Plant
Building access in FTTx networks

 

Installation Features

Store at  -30 to +70 °C
Install at  -5 to +50 °C, Bend minimum 20 times O.D. (installation)
Operate at  -45 to +70 °CBend minimum 15 times O.D. (static)

 

Design

Optical fiber : 125/250μm Single Mode or Multi Mode
Buffer : PBTP loose tube filled with jelly, housing up to 12 fibers
Cable core :  up to 12 tubes stranded together around a central steel strength member, jelly filled
Protection :  wrapping waterblocking tape
Armour:  corrugated steel tape
Outer jacket : Black HDPE material, UV resistant 
Marking : APS Finland – ww/yy – Armoured Fiber Optic Cable MT209EG fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension :  2000 N  
Crush :  1000N/100mm 
Impact :  10J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

 

Colour code of fibers

1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua

 

Colour code of tubes

1 2 3 4 5 6 7 8 9 10 11 12 Fillers
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua Black

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
2 MT189E02xxoo 1 2 5 10.2 126 Drum
4 MT189E04xxoo 1 4 5 10.2 126 Drum
8 MT189E08xxoo 1 8 5 10.2 126 Drum
12 MT189E12xxoo 1 12 5 10.2 126 Drum
24 MT189E24xxoo 2 12 4 10.2 126 Drum
36 MT189E36xxoo 3 12 3 10.2 126 Drum
48 MT189E48xxoo 4 12 2 10.2 126 Drum
72 MT189E72xxoo 6 12 10.2 126 Drum
144 MT189EA4xxoo 12 12 15.0 169 Drum

xx = fiber type                  OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, M5=OM5
oo = delivery length         2000m=D2

 

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access cable MT20GR9R 4-144 cores, Armoured, Direct Burial, 2000N, PVC

  
*All images are indicative

Features

  • Outdoor and duct installation
  • Metallic armour and moisture barrier 
  • Robust, heavy duty 

 

Standards of reference and applications

  • IEC 60793, IEC 60794
  • Intrabuilding Voice and Data/LAN Communication Networks
  • Outside Plant
  • Building access in FTTx networks

 

Installation Features

Store at  -30 to +70 °C
Install at  -5 to +50 °C, Bend minimum 20 times O.D. (installation)
Operate at  -45 to +70 °CBend minimum 15 times O.D. (static)

 

Design

Optical fiber : 125/250μm Single Mode or Multi Mode
Buffer : PBTP loose tube filled with jelly, housing up to 12 fibers
Cable core :  up to 12 tubes stranded together around a central dielectric strength member, jelly filled
Protection :  wrapping waterblocking tape + peripheral glass yarns
Inner jacket : black PVC material (other colours available upon request) 
Moisture barrier :  copolymer coated bonded corrugated steel tape
Outer jacket : black PVC material (other colours available upon request) 
Marking : APS Finland – ww/yy – Armoured Fiber Optic Cable MT20GR9R – fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension :  2000 N  
Crush :  1000N/100mm 
Impact :  10J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

 

Colour code of fibers

1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua

 

Colour code of tubes

1 2 3 4 5 6 7 8 9 10 11 12 Fillers
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua Black

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Fillers Nominal O.D. (mm) Weight (kg/km) Packaging
4 MT20GR9R04xxoo 1 4 5 10.2 249 Drum
8 MT20GR9R08xxoo 1 8 5 10.2 249 Drum
12 MT20GR9R12xxoo 1 12 5 10.2 249 Drum
24 MT20GR9R241xxoo 4 6 2 10.2 249 Drum
24 MT20GR9R242xxoo 2 12 4 10.2 249 Drum
36 MT20GR9R36xxoo 3 12 3 10.2 249 Drum
36 MT20GR9R36xxoo 3 12 3 10.2 249 Drum
48 MT20GR9R48xxoo 4 12 2 10.2 249 Drum
72 MT20GR9R72xxoo 6 12 10.2 249 Drum
144 MT20GR9RA4xxoo 12 12 15.0 276 Drum

xx = fiber type                  OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, M5=OM5
oo = delivery length         2000m=D2

 

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access cable UT9H 2-24 cores, Outdoor, 1500N

  
*All images are indicative
Features

Outdoor and duct installation
Metallic armour and moisture barrier
Compact and light weight

 

Standards of reference and applications

IEC 60793, IEC 60794
Intrabuilding Voice and Data/LAN Communication Networks
Installation in Ducts & Conduits
Building access in FTTx networks

 

Installation Features

Store at  -30 to +70 °C
Install at  -5 to +50 °C, Bend minimum 20 times O.D. (installation)
Operate at  -45 to +60 °CBend minimum 15 times O.D. (static)

 

Design

Optical fiber : 125/250μm Single Mode or Multi Mode
Buffer : PBTP loose tube filled with jelly (nominal diameter 2.3mm).
Protection :  anti-rodent glass yarns.
Armour:  corrugated steel tape.
Outer jacket : Black LSZH material, UV resistant 
Marking : APS Finland – ww/yy – Armoured Fiber Optic Cable UT9H fiber count x fiber type – P/N – lot + meter

 

Environmental properties

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 
Halogen acid gas :
IEC 60754-1, IEC 60754-2
Smoke Emission :
IEC 61034-2, EN 50268-2
Toxicity of evolved gas :
EN 50305 9.2
Flame retardant : 
IEC 60332-1-2

Fire retardant : IEC 60332-3-24 Cat.C
UV resistant :
 UL1581, IEC11801

 

Mechanical properties

Pulling tension :  1500 N (Δα reversible, IEC 60794-1-2-E1)
Crush :  1000N/100mm (Δα reversible, IEC 60794-1-2-E3)
Impact :  10J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

 

Colour code of fibers

1 2 3 4 5 6 7 8 9 10 11 12
Bundle A Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
13 14 15 16 17 18 19 20 21 22 23 24
Bundle B Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Nominal O.D. (mm) Weight (kg/km) Packaging
2 UT9H02xxoo 1 2 8.5 85 Drum
4 UT9H04xxoo 1 4 8.5 85 Drum
8 UT9H08xxoo 1 8 8.5 85 Drum
12 UT9H12xxoo 1 12 8.5 85 Drum
24 UT9H24xxoo 1 24 8.5 85 Drum

xx = fiber type                  OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4
oo = delivery length         2000m=D2

 

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access cable UTAE 2-24 cores, Direct Burial, SWA Armoured

  
*All images are indicative
Features

Outdoor, duct and direct burial installation
Metallic armour and moisture barrier
Compact and light weight

 

Standards of reference and applications

IEC 60793, IEC 60794
Telecommunication backabones
Intrabuilding Voice and Data/LAN Communication Networks

Installation in Ducts & Conduits or Directly Buried
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at -10 to +60 °C, Bend minimum 20 times O.D. (installation)
Operate at  -40 to +70 °CBend minimum 10 times O.D. (static)

 

Design

Optical fiber : 125/250μm Single Mode or Multi Mode
Buffer : PBTP loose tube filled with jelly (nominal diameter 3.0mm).
Inner strength member :  aramide yarns.
Inner jacket :  PE black, nominal thickness 1.0mm.

Armour:  steel wire, one layer, coverage ≥80%.
Outer jacket : PE black, UV resistant, nominal thickness 1.5mm.
Marking : APS Finland – ww/yy – Armoured Fiber Optic Cable UTAE fiber count x fiber type – P/N – lot + meter

 

Environmental properties

UV resistant : UL1581, IEC11801

 

Mechanical properties

Pulling tension :  max 5000 N (Δα reversible, IEC 60794-1-2-E1)
Crush :  3000N/100mm (Δα reversible, IEC 60794-1-2-E3)
Impact :  15J (Δα reversible, IEC 60794-1-2-E4)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

 

Colour code of fibers

1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
13 14 15 16 17 18 19 20 21 22 23 24
Blue/black Orange/black Green/black Brown/black Grey/black White/black Red/black Natural Yellow/black Violet/black Pink/black Aqua/black

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Nominal O.D. (mm) Weight (kg/km) Packaging (*)
2 UTAE02xxoo 1 2 10.3 178 Drum
4 UTAE04xxoo 1 4 10.3 178 Drum
8 UTAE08xxoo 1 8 10.3 178 Drum
12 UTAE12xxoo 1 12 10.3 178 Drum
24 UTAE24xxoo 1 24 10.3 178 Drum

xx = fiber type                  OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
oo = delivery length         2000m=D2
(*) a tolerance of ±5% applies to the delivery length.               

 

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access cable UTAH 2-24 cores, SWA Armoured, Fire Retardant & LSZH

  
*All images are indicative

Features

Outdoor, duct and direct burial installation
Metallic armour
Excellent rodent resistance
Watertight
Fire Retardant, LSZH

 

 

Standards of reference and applications

IEC 60793, IEC 60794
Telecommunication backabones
Intrabuilding Voice and Data/LAN Communication Networks

Installation in Ducts & Conduits or Directly Buried
Building access in FTTx networks

 

Installation Features

Store at  -40 to +70 °C
Install at -10 to +60 °C, Bend minimum 20 times O.D. (installation)
Operate at  -40 to +70 °CBend minimum 15 times O.D. (static)

 

Design

Optical fiber : 125/250μm Single Mode or Multi Mode
Buffer : PBTP loose tube filled with jelly, nominal diameter 3.5mm (2-12 cores), 4.5mm (16, 24 cores).
Inner strength member :  aramide yarns.
Inner jacket :  LSZH black, nominal thickness 1.0mm.

Armour:  steel wire, one layer, coverage ≥80%.
Outer jacket : LSZH black, UV resistant, nominal thickness 1.5mm.
Marking : APS Finland – ww/yy – Armoured Fiber Optic Cable UTAH fiber count x fiber type – P/N – lot + meter

 

Environmental properties

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 
Halogen acid gas : IEC 60754-1, IEC 60754-2 
Smoke Emission : IEC 61034-2, EN 50268-2
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-24 Cat.C
Oil resistant : intermittent splash – permanent resistance available upon request
Water penetration : IEC 60794-1-2-F5-B (inner core only)
UV resistant : ASTM G 154 IEC 60068-2-5

 

Mechanical properties

Impact :  5J (Δα reversible, IEC 60794-1-2-E4)
Repeated bending :  25 cycles (IEC 60794-1-21 E6, r = 220mm, 4Kg)

Torsion :  10 Turns (IEC 60794-1-21 E7, 2m, ±180°, 4Kg)
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

 

Colour code of fibers

1 2 3 4 5 6 7 8 9 10 11 12
Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
13 14 15 16 17 18 19 20 21 22 23 24
Blue/black Orange/black Green/black Brown/black Grey/black White/black Red/black Natural Yellow/black Violet/black Pink/black Aqua/black

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Nominal O.D. (mm) Weight (kg/km) Pulling tension (installation) Pulling tension (operation) Packaging (*)
2 UTAH02xxoo 1 2 11.1 217 4500N 3500N Drum
4 UTAH04xxoo 1 4 11.1 217 4500N 3500N Drum
8 UTAH08xxoo 1 8 11.1 217 4500N 3500N Drum
12 UTAH12xxoo 1 12 11.1 217 4500N 3500N Drum
16 UTAH16xxoo 1 16 12.3 240 6000N 4500N Drum
24 UTAH24xxoo 1 24 12.3 240 6000N 4500N Drum

xx = fiber type                  OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
oo = delivery length         2000m=D2
(*) a tolerance of ±5% applies to the delivery length.               

 

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


MOG Fiber Optic Cable CT25H9H 2-24 cores, CST Armoured, Fire Retardant & LSZH

  
*All images are indicative

Features

  • Outdoor and duct installation
  • Metallic armour
  • Excellent rodent resistance
  • Watertight
  • Fire Retardant, LSZH, UV-Resistant

 

 

Standards of reference and applications

  • IEC 60793, IEC 60794
  • Telecommunication backbones
  • Intrabuilding Voice and Data/LAN Communication Networks
  • Installation in Ducts & Conduits or open air
  • Building access in FTTx networks
  • Marine, Oil&Gas, Onshore & Offshore 
  • Heavy duty 

 

Installation Features

Store at  -10 to +70 °C
Install at -0 to +50 °C, Bend minimum 20 times O.D. (installation)
Operate at  -30 to +70 °CBend minimum 10 times O.D. (static)

 

Design

Optical fiber : 125/250μm Single Mode or Multi Mode
Buffer : PBTP loose tube filled with jelly, nominal diameter 2.8-3.5mm (2-12 cores) or 4.2-4.5mm (16, 24 cores).
Inner strength member :  glass yarns.
Inner jacket :  LSZH black, nominal thickness 1.0mm.

Armour:  corrugated steel tape, optical coverage 100%.
Outer jacket : LSZH black, UV resistant, nominal thickness 1.5mm.
Marking : APS Finland – ww/yy – Armoured Fiber Optic Cable CT25H9H fiber count x fiber type – P/N – lot + meter

 

Environmental properties

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 
Halogen acid gas : IEC 60754-1, IEC 60754-2 
Smoke Emission : IEC 61034-2, EN 50268-2
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-22 Cat.A
Water penetration : IEC 60794-1-2-F5-B (inner core only)
UV resistant : ASTM G 154, IEC 60068-2-5, UL1581

 

Mechanical properties

Pulling tension : 2500N (installation), 1000N (operation);
Crush :  2500N/100mm;

Impact :
  5J 
Repeated bending :  25 cycles
Torsion :  10 Turns
Water penetration :  3m cable, 1m water, 24 hours (IEC 60794-1-2-F5)

 

Colour code of fibers

1 2 3 4 5 6 7 8 9 10 11 12
Bundle A Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
13 14 15 16 17 18 19 20 21 22 23 24
Bundle B Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua

 

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number No. of tubes Fibers per tube Nominal O.D. (mm) Weight (kg/km) Packaging (*)
2 CT25H9H02xxoo 1 2 11.5 185 Drum
4 CT25H9H04xxoo 1 4 11.5 185 Drum
8 CT25H9H08xxoo 1 8 11.5 185 Drum
12 CT25H9H12xxoo 1 12 11.5 185 Drum
16 CT25H9H16xxoo 1 16 13.0 220 Drum
24 CT25H9H24xxoo 1 24 13.0 220 Drum

xx = fiber type                  OS2=S2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=M5
oo = delivery length         2000m=D2, 4000m=D4
(*) a tolerance of ±5% applies to the delivery length.               

 

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access DROP cable BOWA 1-4 cores, self-supporting, all dielectric

    
*All images are indicative

 

Features

Aerial installation (F8 type)
All Dielectric Non-Metallic design
LSZH Fire Retardant
Suitable for both indoor and outdoor
UV-Resistant outer jacket
Small size
100% dry design
Low installation cost
Easy to strip
Direct Connection to Terminal Equıpments

 

Standards of reference and applications

EN 50173-1, IEC 60754-2, IEC 60794-1&2, IEC 60793-1&2, IEC 60332-1 & 2
FTTH Applications

Aerial (F8 Type with Steel Messenger Wire) 
Drop Cabling
Intrabuilding Voice or Data Communication Networks
Outdoor Interconnect and Patchcord Applications
Interconnection of Distribution Boxes, Distribution Frames and Customer Equipment and between the buildings
WAN
Aerial (Lashed)

 

Installation Features

Store at  -40 to +70 °C
Install at  -10 to +60 °C
Operate at  -40 to +70 °C 

 

Design

Optical fiber :  1 to 4 cores 125/250μm, Single Mode or Multi Mode
Outer jacket :  Black LSZH-HFFR material

Self supporting element :  FRP rod 1.0mm
Peripheral pulling elements : 
FRP rod 0.5mm
Marking :  APS Finland – ww/yy – DROP Fiber Optic Cable BOWA fiber count x fiber type – P/N – lot + meter

 

Environmental properties

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 
Halogen acid gas corrosiveness :
TS EN 50267-2-3
Smoke Emission :
IEC 61034-2
Flame retardant : 
IEC 60332-1-1, IEC60332-2-1
UV resistant :
 UL1581, IEC11801

 

Mechanical properties

Bending radius : 15 x O.D. (OS2 and MM), 10 x O.D. (G657A1/2)
Pulling tension, during installation :
  600 N
Pulling tension, permanent :  400 N
Crush :  600N/100mm (IEC 60794-1-2 E3)
Impact :  5J (Δα reversible, IEC 60794-1-2-E4)

 

 

Colour code of fibers

  1 2 3 4
Fiber Colours Blue Orange Green Brown

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number Nominal O.D. (mm) Weight (kg/km) Packaging
1 DRBA1xxxoo 5.2 x 2.0 21 Drum (1 or 2km)
2 DRBA2xxxoo 5.2 x 2.0 21 Drum (1 or 2km)
4 DRBA4xxxoo 5.2 x 2.0 21 Drum (1 or 2km)

xx = fiber type                  ex. OS2=S2, G657a1=7A1, G657a2=7A2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=5
oo = delivery length         ex. 1000m=D1, 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC FO Access DROP cable BOWM 1-4 cores, self-supporting, steel wire

    
*All images are indicative

 

Features

Aerial installation (F8 type)
Metallic supporting and pulling elements
LSZH Fire Retardant
Suitable for both indoor and outdoor
UV-Resistant outer jacket
Small size
100% dry design
Low installation cost
Easy to strip
Direct Connection to Terminal Equıpments

 

Standards of reference and applications

EN 50173-1, IEC 60754-2, IEC 60794-1&2, IEC 60793-1&2, IEC 60332-1 & 2
FTTH Applications

Aerial (F8 Type with Steel Messenger Wire) 
Drop Cabling
Intrabuilding Voice or Data Communication Networks
Outdoor Interconnect and Patchcord Applications
Interconnection of Distribution Boxes, Distribution Frames and Customer Equipment and between the buildings
WAN
Aerial (Lashed)

 

Installation Features

Store at  -40 to +70 °C
Install at  -10 to +60 °C
Operate at  -40 to +70 °C 

 

Design

Optical fiber :  1 to 4 cores 125/250μm, Single Mode or Multi Mode
Outer jacket :  Black LSZH-HFFR material

Self supporting element :  steel wire 1 x 1.0mm
Peripheral pulling elements : 
2 x steel wires 0.45mm (FRP also available) 
Marking :  APS Finland – ww/yy – DROP Fiber Optic Cable BOW0 fiber count x fiber type – P/N – lot + meter

 

Environmental properties

Degree of acidity of gases : IEC 60754-1, IEC 60754-2 
Halogen acid gas corrosiveness :
TS EN 50267-2-3
Smoke Emission :
IEC 61034-2
Flame retardant : 
IEC 60332-1-1, IEC60332-2-1
UV resistant :
 UL1581, IEC11801

 

Mechanical properties

Bending radius : 15 x O.D. (OS2 and MM), 10 x O.D. (G657A1/2)
Pulling tension, max :
  500 N
Crush :  600N/100mm (IEC 60794-1-2 E3)
Impact :  2J (Δα reversible, IEC 60794-1-2-E4)

 

 

Colour code of fibers

  1 2 3 4
Fiber Colours Blue Orange Green Brown

 

Fiber Optic characteristics

See detailed specification of optical fibers.

 

Ordering and delivery information

Fiber Count Part Number Nominal O.D. (mm) Weight (kg/km) Packaging
1 DRM01xxxoo 5.2 x 2.0 21 Plywood drum (1 or 2km)
2 DRM02xxxoo 5.2 x 2.0 21 Plywood drum (1 or 2km)
4 DRM04xxxoo 5.2 x 2.0 21 Plywood drum (1 or 2km)

xx = fiber type                  ex. OS2=S2, G657a1=7A1, G657a2=7A2, OM1=M1, OM2=M2, OM3=M3, OM4=M4, OM5=5
oo = delivery length         ex. 1000m=D1, 2000m=D2, 4000m=D4

Recommended connectivity

Pigtails : APS LIIN-25 series
Patch cords : APS LIIN-25 series
Adapters : APS LIIN-25 series
Patch Panels : APS LIIN-25 series

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC Access Distribution Box (ADBI1) up to 6 trays (12 fibers/tray)

Standards of reference and applications

  • Subscriber Access
  • Fiber-to-the-x
  • Telecommunication, WAN

 

Main Features

  • Dust-proof design, IP54 protection
  • Integrated splice cassette and cable/fiber management
  • Suitable for both fusion and mechanical splice
  • up to 6 trays (12/24 fibers per tray)
  • Designed for 20 years lifetime

Installation Features

Store at -0 to +70 °C
Install at -0 to +50 °C
Operate at -40 to +70 °C

 

Design and specifications

Material : plastic, flame retardant V0
Colour : black
Seal material (box) : EPDM
Seal material (ports) : Rubber
Protection rating : IP54

Entry ports and cable diameter (max) : 2 x 25mm rubber grommets
Output ports and cable diameter (max) : 5 x 15mm rubber grommets
Max no of splice trays : 6
Splice capacity of each tray :
12/24 fo
Type of adaptors: SC Simplex or LC Duplex
Max no of adaptors : 24 SC

Cover open fixed position : 90 and 180 degrees
Lock type : key lock with dust proof cover
Mount : wall or pole

Size : 245*296*94.5 mm
P/N : ADBI1OWP61224S (w/o lock)
P/N : ADBI1OWP61224L (w/o lock)

Locking mechanism

Opening mechanism

 

Trays specification

Part No. Splice tray SET612 PLC Splitter tray SRT
Dimensions 115x144x10mm 115x144x10mm
Material ABS ABS
Splice capacity 12/24 FO 6/12 FO
Suitable sleeve 40-45mm 40-45mm
Splice module Fixed Removable
Splitter type N/A Micro PLC Splitter
Bend radius ≥30mm ≥30mm
Plastic cover top tray only top tray only
Transparent cover all trays except the top one all trays except the top one

 

 

Recommended connectivity

Adaptors : all LIIN-25 adaptors SC and LC (UPC or APC), SM and MM
Pigtails : all LIIN-25 pigtails SC and LC (UPC or APC), SM and MM
Patchcords : all LIIN-25 patchcords SC and LC (UPC or APC), SM and MM

.

 

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC Access Distribution Box (ADBI2) up to 6 trays (12 fibers/tray)

Standards of reference and applications

  • Subscriber Access
  • Fiber-to-the-x
  • Telecommunication, WAN

 

Main Features

  • Dust-proof design, IP54 protection
  • Integrated splice cassette and cable/fiber management
  • Suitable for both fusion and mechanical splice
  • up to 6 trays (12/24 fibers per tray)
  • Designed for 20 years lifetime

Installation Features

Store at -0 to +70 °C
Install at -0 to +50 °C
Operate at -40 to +70 °C

 

Design and specifications

Material : plastic, flame retardant V0
Colour : black
Cables holders :plastic, flame retardant V0
Seal material (box) :
EPDM
Seal material (ports) : Rubber
Protection rating : IP54

Entry ports and cable diameter (max) : 2 x 25mm rubber grommets
Output ports and cable diameter (max) : 5 x 15mm rubber grommets
Max no of splice trays : 6
Splice capacity of each tray :
12/24 fo
Type of adaptors: SC Simplex or LC Duplex
Max no of adaptors : 24 SC

Cover open fixed position : 90 and 180 degrees
Lock type : key lock with dust proof cover
Mount : wall or pole

Size : 245*296*94.5 mm
P/N : ADBI2OWP61224S (w/o lock)
P/N : ADBI2OWP61224L (w/o lock)

Locking mechanism

Opening mechanism

 

Trays specification

Part No. Splice tray SET612 PLC Splitter tray SRT
Dimensions 115x144x10mm 115x144x10mm
Material ABS ABS
Splice capacity 12/24 FO 6/12 FO
Suitable sleeve 40-45mm 40-45mm
Splice module Fixed Removable
Splitter type N/A Micro PLC Splitter
Bend radius ≥30mm ≥30mm
Plastic cover top tray only top tray only
Transparent cover all trays except the top one all trays except the top one

 

 

Recommended connectivity

Adaptors : all LIIN-25 adaptors SC and LC (UPC or APC), SM and MM
Pigtails : all LIIN-25 pigtails SC and LC (UPC or APC), SM and MM
Patchcords : all LIIN-25 patchcords SC and LC (UPC or APC), SM and MM

.

 

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC Access Terminal Box (FAT), Indoor 2 and 4 Ways, SC / LC

Standards of reference and applications

  • LAN/SAN
  • CATV networks
  • Fiber-to-the-home (FTTH) applications

 

Main Features

  • Dust-proof design, IP45 protection
  • Integrated splice cassette and cable/fiber management
  • Suitable for both fusion and mechanical splice
  • Embedded surface with easy-to-remove cover
  • 2 and 4 ports models

Installation Features

Store at  -0 to +70 °C
Install at  -0 to +50 °C
Operate at  -40 to +85 °C

 

Design, 2 ports model

Material :  PC + ABS plastic
Colour :  white
Number of ports :  2
Type of adaptors:  SC Simplex or LC Duplex
Number of cores:  up to 2 (with SC adaptors) or 4 (with LC adaptors)
Mount :  wall type
Size :  86*86*27 mm
Weight:  0.2 kg
P/N :  FATB2SAE

 

 

Design, 4 ports model

Material :  PC + ABS plastic
Colour :  Grey
Number of ports :  4
Type of adaptors:  SC Simplex or LC Duplex
Number of cores:  up to 4 (with SC adaptors) or 8 (with LC adaptors)
Mount :  wall type
Size :  225*160*45 mm
Weight:  0.4 kg
P/N :  FATB4SAE

 

Recommended connectivity

Adaptors :  all LIIN-25 adaptors SC and LC (UPC or APC), SM and MM
Pigtails :   all LIIN-25 pigtails SC and LC (UPC or APC), SM and MM
Patchcords :  all LIIN-25 patchcords SC and LC (UPC or APC), SM and MM

.

 

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC Access Terminal Box (FAT), Outdoor 36-72 cores, SC / LC

Standards of reference and applications

  • LAN/SAN
  • CATV networks
  • Fiber-to-the-home (FTTH) applications

 

Main Features

  • Dust-proof design, IP65 protection
  • Integrated splice cassette and cable/fiber management
  • Layered design: supports separation of fiber splitting and spool into different layers.
  • Snap-in-place adapter design
  • Compact size and light weight design

 

Installation Features

Store at  -0 to +60 °C
Install at  -0 to +50 °C
Operate at  -40 to +65 °C

 

Design

Material :  PC plastic
Colour :  NB white
Type of adaptors:  SC or LC
Number of cores:  36, 48, 72.
Installation :  wall and pole mount.
Flame retardant :  UL94-V0


 

Ordering and delivery information 

Item P/N Dimension (mm) Weight (kg)
FAT 36 cores, unloaded FATO136U 420 x 320 x 125 2.1
FAT 48 cores, unloaded FATO148U 420 x 320 x 125 2.3
FAT 72 cores, unloaded FATO172U 420 x 320 x 125 2.7
FAT 36 cores, loaded with adapters and pigtails FATO136L aaa 420 x 320 x 125 2.1
FAT 48 cores, loaded with adapters and pigtails FATO148L aaa 420 x 320 x 125 2.3
FAT 72 cores, loaded with adapters and pigtails FATO172L aaa 420 x 320 x 125 2.7

aaa = connector type :
SC/UPC SX = SUS
SC/UPC DX = SUD
SC/APC SX = SAS
SC/APC DX = SAD
LC/UPC DX = LUD
LC/APC DX = LAD

 

Recommended connectivity

Adaptors :  all LIIN-25 adaptors SC and LC (UPC or APC), SM and MM
Pigtails :   all LIIN-25 pigtails SC and LC (UPC or APC), SM and MM
Patchcords :  all LIIN-25 patchcords SC and LC (UPC or APC), SM and MM

.

 

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


LIACC Anchoring clamps (ANC)

 

Description

ANC anchoring clamps are made of one opened conical fibre glass reinforced body, a pair of plastic wedges and a flexible bail. Different sizes offer a wide range of gripping capacities and mechanical resistances to fit the various ADSS cable designs.

The ADSS series of anchoring clamps allow an easy and quick securing of Ø 8 to 20 mm aerial circular fibre optic cables (ADSS) on short spans (up to 150 meters).

Design and specifications

Body :  UV Protected Thermoplastic
Bail :  Stainless steel
Breaking load :  5 000N
Weight :  0.4 kg

 

 

Dimensions

 

 

 

 

 

 

 

 

Installation – single dead-ending

Made of 1 anchoring clamp + 1 universal pole bracket (UPB)

 

 

 

 

 

 

 

 

 

Installation – double dead-ending

Made of 2 anchoring clamp + 1 universal pole bracket (UPB)

 

 

 

 

 

 

 

 

 

Ordering and delivery information

P/N Cable O.D.
ANCADSS12 8~12mm
ANCADSS14 10~14mm
ANCADSS16 12~16mm
ANCADSS18 14~18mm
ANCADSS20 16~20mm

 

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.
AP Solutions Oy – www.aps-finland.fi – info@apsolutions.fi