Category: Category 6A screened cabling system - APS Finland

Patch panel, 24 ports RJ45, unloaded

Standards of reference and applications

EIA19″

Installation Features

Store at  -0 to +70 °C
Install at  -0 to +50 °C
Operate at : -20 to +60 °C
Fitting : designed for unshielded and shielded LAN 1 unit EIA 19″ rack mount.

 

Design

Material : black powder painted steel (front), galvanised steel (rear).
Features : built-in cable holder rack with cable shield termination.
Printing :   Numbered 1-24
Size :  18.4 x 38.4 x 25.7 mm, 1 Unit

 

Ordering and delivery information

Ports P/N Size [mm] Weight [kg/km] Packaging
24 PPE24SU 18.4H x 38.4W x 25.7D 1.0 1 pc/box

 

Recommended connectivity

Keystone jack : all APS Keystone Jacks Category 5e, 6, 6A.
Patchcords : PCMJ6U_, PCMJ6F_, PCMJ6S_.

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


SCS6AS Cat.6A cable F/UTP 4 pairs AWG23/1 PE Outdoor

 

Standards of reference and applications

EIA/TIA 568-C.2, ISO/IEC 11801, EN 50288-10, IEC 61156‐5, EN 50173-1
Gigabit Ethernet 10GBASE-T, Ethernet 10 BASE-T, Fast Ethernet 100 BASE-T, Fast Ethernet 100 BASE-TX, 155 Mbit ATM, 625 Mbit ATM, 1.2 Gbit ATM
IEEE 802.3af Power over Ethernet (PoE) , IEEE 802.3at Power over Ethernet Plus (PoE+)

 

Installation Features

Store at  -0 to +70 °C
Install at  -0 to +50 °C
Operate at : -10 to +60 °C
Bend minimum : 10 times O.D.
Bend minimum : 10 times O.D.
Pull maximum : 40N

 

Design

Conductor : solid bare copper AWG23 (0.57mm ± 0.005 mm)
Insulation : polyethylene 1.15 ± 0.02 mm
Pair : 2 insulated conductors stranded together
Colour code : 1.White/blue  2.White/orange  3. White/green  4.White/brown
Assembling : no 4 pairs assembled together around a PE central cross
Wrapping :  polyester tape
Screen :  aluminium foil
Outer jacket : black PE material
Marking : APS Finland – ww/yy – F/UTP 4x2x23AWG Category 6A – PE OUDOOR – Extended Frequency 500MHz 100Ohm – ISO/IEC 11801 – /lot + meter

 

Environmental properties and Fire Performances

UV resistant : UL 1581

 

Electrical characteristics

Resistance of the conductor @ 20°C : ≤ 95 Ω/km
Mutual Capacitance : 56 pF/m (cond/cond)
Capacitance unbalance : 3300 pF/km (p/p @ 1KHz)
Average characteristic impedance : 100 ± 15 Ω @ 100MHz
Velocity of propagation (NVP) : 70%

Frequency (MHz) : 4 8 10 16 20 25 31.25 62.5 100 200 250 300 400 500
Attenuation (dB/100m) 3.8 5.3 5.9 7.5 8.4 9.4 10.5 15.0 19.1 27.6 31.1 34.3 40.1 45.3
NEXT (dB) 66.3 61.8 60.3 57.2 55.8 54.3 52.9 48.4 45.3 40.8 39.3 38.1 36.3 34.8
PS-NEXT (dB) 63.3 58.8 57.3 54.2 52.8 51.3 49.9 45.4 42.3 37.8 36.3 35.1 33.3 31.8
ELFEXT (dB) 56.0 49.9 48.0 43.9 42.0 40.0 38.1 32.1 28.0 22.0 20.0 18.5 16.0 14.0
PS-ELFEXT (dB) 53.0 46.9 45.0 40.9 39.0 37.0 35.1 29.1 25.0 29.0 17.0 15.5 13.0 11.0
Return Loss 23.0 24.5 25.0 25.0 25.0 24.3 23.6 21.5 20.1 18.0 17.3 17.3 17.3 17.3

Ordering and delivery information

Pair count P/N O.D [mm] Weight [kg/km] Packaging
4 pairs DCC6AFTP4PE 7.5 58.0 305m / 1000ft drum

Recommended connectivity

Keystone jack : KJ6ASTPNH / KJ6ASTPNY
RJ45 plug : RJ45S6APL231 / RJ45S6ABT231
Panel : PPE24SU
Patchcords : PCMJ6F series, PCMJ6S series
Faceplate : FP86150S245, FP86171S245

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


SCS6AS Cat.6A cable F/UTP 4 pairs AWG23/1 LSZH Indoor

Standards of reference and applications

EIA/TIA 568-C.2, ISO/IEC 11801, EN 50288-10, IEC 61156‐5, EN 50173-1
Gigabit Ethernet 10GBASE-T, Ethernet 10 BASE-T, Fast Ethernet 100 BASE-T, Fast Ethernet 100 BASE-TX, 155 Mbit ATM, 625 Mbit ATM, 1.2 Gbit ATM
IEEE 802.3af Power over Ethernet (PoE) , IEEE 802.3at Power over Ethernet Plus (PoE+)

 

Installation Features

Store at  -0 to +70 °C
Install at  -0 to +50 °C
Operate at : -10 to +60 °C
Bend minimum : 10 times O.D.
Bend minimum : 10 times O.D.
Pull maximum : 40N

 

Design

Conductor : solid bare copper AWG23 (0.57mm ± 0.005 mm)
Insulation : polyethylene 1.15 ± 0.02 mm
Pair : 2 insulated conductors stranded together
Colour code : 1.White/blue  2.White/orange  3. White/green  4.White/brown
Assembling : no 4 pairs assembled together around a PE central cross
Wrapping :  polyester tape
Screen :  aluminium foil
Outer jacket : grey LSZH material
Marking : APS Finland – ww/yy – F/UTP 4x2x23AWG Category 6A – Extended Frequency 500MHz 100Ohm – ISO/IEC 11801 – LSZH-HF – lot + m

 

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1/2
Halogen acid gas : IEC 60754-1/2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-24 Cat.C

 

Electrical characteristics

Resistance of the conductor @ 20°C : ≤ 95 Ω/km
Mutual Capacitance : 56 pF/m (cond/cond)
Capacitance unbalance : 3300 pF/km (p/p @ 1KHz)
Average characteristic impedance : 100 ± 15 Ω @ 100MHz
Velocity of propagation (NVP) : 70%

Frequency (MHz) : 4 8 10 16 20 25 31.25 62.5 100 200 250 300 400 500
Attenuation (dB/100m) 3.8 5.3 5.9 7.5 8.4 9.4 10.5 15.0 19.1 27.6 31.1 34.3 40.1 45.3
NEXT (dB) 66.3 61.8 60.3 57.2 55.8 54.3 52.9 48.4 45.3 40.8 39.3 38.1 36.3 34.8
PS-NEXT (dB) 63.3 58.8 57.3 54.2 52.8 51.3 49.9 45.4 42.3 37.8 36.3 35.1 33.3 31.8
ELFEXT (dB) 56.0 49.9 48.0 43.9 42.0 40.0 38.1 32.1 28.0 22.0 20.0 18.5 16.0 14.0
PS-ELFEXT (dB) 53.0 46.9 45.0 40.9 39.0 37.0 35.1 29.1 25.0 29.0 17.0 15.5 13.0 11.0
Return Loss 23.0 24.5 25.0 25.0 25.0 24.3 23.6 21.5 20.1 18.0 17.3 17.3 17.3 17.3

 

Ordering and delivery information

Pair count P/N O.D [mm] Weight [kg/km] Packaging
4 pairs DCC6AFTP4PV 7.5 51.0 305m / 1000ft box

 

Recommended connectivity

Keystone jack : KJ6ASTPNH / KJ6ASTPNY
RJ45 plug : RJ45S6APL231 / RJ45S6ABT231
Panel : PPE24SU
Patchcords : PCMJ6F series, PCMJ6S series
Faceplate : FP86150S245, FP86171S245

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system. Learn about APS System Warranty from here.

 

 

 
 
Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


SCS6AS Cat.6A cable F/UTP 4 pairs AWG23/1 PVC Indoor

Standards of reference and applications

EIA/TIA 568-C.2, ISO/IEC 11801, EN 50288-10, IEC 61156‐5, EN 50173-1
Gigabit Ethernet 10GBASE-T, Ethernet 10 BASE-T, Fast Ethernet 100 BASE-T, Fast Ethernet 100 BASE-TX, 155 Mbit ATM, 625 Mbit ATM, 1.2 Gbit ATM
IEEE 802.3af Power over Ethernet (PoE) , IEEE 802.3at Power over Ethernet Plus (PoE+)

 

Installation Features

Store at  -0 to +70 °C
Install at  -0 to +50 °C
Operate at : -10 to +60 °C
Bend minimum : 10 times O.D.
Bend minimum : 10 times O.D.
Pull maximum : 40N

 

Design

Conductor : solid bare copper AWG23 (0.57mm ± 0.005 mm)
Insulation : polyethylene 1.15 ± 0.02 mm
Pair : 2 insulated conductors stranded together
Colour code : 1.White/blue  2.White/orange  3. White/green  4.White/brown
Assembling : no 4 pairs assembled together around a PE central cross
Wrapping :  polyester tape
Screen :  aluminium foil
Outer jacket : grey PVC material
Marking : APS Finland – ww/yy – F/UTP 4x2x23AWG Category 6A – Extended Frequency 500MHz 100Ohm – ISO/IEC 11801 – /lot + meter

 

Environmental properties and Fire Performances

Flame retardant : IEC 60332-1-2

 

Electrical characteristics

Resistance of the conductor @ 20°C : ≤ 95 Ω/km
Mutual Capacitance : 56 pF/m (cond/cond)
Capacitance unbalance : 3300 pF/km (p/p @ 1KHz)
Average characteristic impedance : 100 ± 15 Ω @ 100MHz
Velocity of propagation (NVP) : 70%

Frequency (MHz) : 4 8 10 16 20 25 31.25 62.5 100 200 250 300 400 500
Attenuation (dB/100m) 3.8 5.3 5.9 7.5 8.4 9.4 10.5 15.0 19.1 27.6 31.1 34.3 40.1 45.3
NEXT (dB) 66.3 61.8 60.3 57.2 55.8 54.3 52.9 48.4 45.3 40.8 39.3 38.1 36.3 34.8
PS-NEXT (dB) 63.3 58.8 57.3 54.2 52.8 51.3 49.9 45.4 42.3 37.8 36.3 35.1 33.3 31.8
ELFEXT (dB) 56.0 49.9 48.0 43.9 42.0 40.0 38.1 32.1 28.0 22.0 20.0 18.5 16.0 14.0
PS-ELFEXT (dB) 53.0 46.9 45.0 40.9 39.0 37.0 35.1 29.1 25.0 29.0 17.0 15.5 13.0 11.0
Return Loss 23.0 24.5 25.0 25.0 25.0 24.3 23.6 21.5 20.1 18.0 17.3 17.3 17.3 17.3

Ordering and delivery information

Pair count P/N O.D [mm] Weight [kg/km] Packaging
4 pairs DCC6AFTP4PV 7.5 51.0 305m / 1000ft box

Recommended connectivity

Keystone jack : KJ6ASTPNH / KJ6ASTPNY
RJ45 plug : RJ45S6APL231 / RJ45S6ABT231
Panel : PPE24SU
Patchcords : PCMJ6F series, PCMJ6S series
Faceplate : FP86150S245, FP86171S245

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


SCS6AS Cat.6A cable U/FTP 4 pairs AWG23/1 LSZH Indoor

Standards of reference and applications

EIA/TIA 568-C.2, ISO/IEC 11801, EN 50288-10, IEC 61156‐5, EN 50173-1
Gigabit Ethernet 10GBASE-T, Ethernet 10 BASE-T, Fast Ethernet 100 BASE-T, Fast Ethernet 100 BASE-TX, 155 Mbit ATM, 625 Mbit ATM, 1.2 Gbit ATM
IEEE 802.3af Power over Ethernet (PoE) , IEEE 802.3at Power over Ethernet Plus (PoE+)

 

Installation Features

Store at  -0 to +70 °C
Install at  -0 to +50 °C
Operate at : -10 to +60 °C
Bend minimum : 10 times O.D.
Bend minimum : 10 times O.D.
Pull maximum : 40N

 

Design

Conductor : solid bare copper AWG23 (0.57mm ± 0.005 mm)
Insulation : polyethylene 1.15 ± 0.02 mm
Pair : 2 insulated conductors stranded together
Colour code : 1.White/blue  2.White/orange  3. White/green  4.White/brown
Screen :  aluminium foil over each single pair
Assembling : no 4 screened pairs assembled together
Wrapping :  polyester tape
Outer jacket : grey LSZH material
Marking : APS Finland – ww/yy – U/FTP 4x2x23AWG Category 6A – Extended Frequency 500MHz 100Ohm – ISO/IEC 11801 -LSZH-HF – lot + m

 

Environmental properties and Fire Performances

Degree of acidity of gases : IEC 60754-1/2
Halogen acid gas : IEC 60754-1/2 (Halogen acid gas emission ≤ 0.5%)
Smoke Emission : IEC 61034-2, EN 50268-2 (Transmittance) ≥ 60%)
Toxicity of evolved gas : EN 50305 9.2
Flame retardant : IEC 60332-1-2
Fire retardant : IEC 60332-3-24 Cat.C

 

Electrical characteristics

Resistance of the conductor @ 20°C : ≤ 95 Ω/km
Mutual Capacitance : 56 pF/m (cond/cond)
Capacitance unbalance : 3300 pF/km (p/p @ 1KHz)
Average characteristic impedance : 100 ± 15 Ω @ 100MHz
Velocity of propagation (NVP) : 70%

Frequency (MHz) : 4 8 10 16 20 25 31.25 62.5 100 200 250 300 400 500
Attenuation (dB/100m) 3.8 5.3 5.9 7.5 8.4 9.4 10.5 15.0 19.1 27.6 31.1 34.3 40.1 45.3
NEXT (dB) 66.3 61.8 60.3 57.2 55.8 54.3 52.9 48.4 45.3 40.8 39.3 38.1 36.3 34.8
PS-NEXT (dB) 63.3 58.8 57.3 54.2 52.8 51.3 49.9 45.4 42.3 37.8 36.3 35.1 33.3 31.8
ELFEXT (dB) 56.0 49.9 48.0 43.9 42.0 40.0 38.1 32.1 28.0 22.0 20.0 18.5 16.0 14.0
PS-ELFEXT (dB) 53.0 46.9 45.0 40.9 39.0 37.0 35.1 29.1 25.0 29.0 17.0 15.5 13.0 11.0
Return Loss 23.0 24.5 25.0 25.0 25.0 24.3 23.6 21.5 20.1 18.0 17.3 17.3 17.3 17.3

 

Ordering and delivery information

Pair count P/N O.D [mm] Weight [kg/km] Packaging
4 pairs DCC6AFUTP4PV 7.5 53.0 305m / 1000ft box

 

Recommended connectivity

Keystone jack : KJ6ASTPNH / KJ6ASTPNY
RJ45 plug : RJ45S6APL231 / RJ45S6ABT231
Panel : PPE24SU
Patchcords : PCMJ6F series, PCMJ6S series
Faceplate : FP86150S245, FP86171S245

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system. Learn about APS System Warranty from here.

 

 

 
 
Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


SCS6AS Cat.6A cable U/FTP 4 pairs AWG23/1 PVC Indoor

Standards of reference and applications

EIA/TIA 568-C.2, ISO/IEC 11801, EN 50288-10, IEC 61156‐5, EN 50173-1
Gigabit Ethernet 10GBASE-T, Ethernet 10 BASE-T, Fast Ethernet 100 BASE-T, Fast Ethernet 100 BASE-TX, 155 Mbit ATM, 625 Mbit ATM, 1.2 Gbit ATM
IEEE 802.3af Power over Ethernet (PoE) , IEEE 802.3at Power over Ethernet Plus (PoE+)

 

Installation Features

Store at  -0 to +70 °C
Install at  -0 to +50 °C
Operate at : -10 to +60 °C
Bend minimum : 10 times O.D.
Bend minimum : 10 times O.D.
Pull maximum : 40N

 

Design

Conductor : solid bare copper AWG23 (0.57mm ± 0.005 mm)
Insulation : polyethylene 1.15 ± 0.02 mm
Pair : 2 insulated conductors stranded together
Colour code : 1.White/blue  2.White/orange  3. White/green  4.White/brown
Screen :  aluminium foil over each single pair
Assembling : no 4 screened pairs assembled together
Wrapping :  polyester tape
Outer jacket : grey PVC material
Marking : APS Finland – ww/yy – U/FTP 4x2x23AWG Category 6A – Extended Frequency 500MHz 100Ohm – ISO/IEC 11801 – lot + meter

 

Environmental properties and Fire Performances

Flame retardant : IEC 60332-1-2

 

Electrical characteristics

Resistance of the conductor @ 20°C : ≤ 95 Ω/km
Mutual Capacitance : 56 pF/m (cond/cond)
Capacitance unbalance : 3300 pF/km (p/p @ 1KHz)
Average characteristic impedance : 100 ± 15 Ω @ 100MHz
Velocity of propagation (NVP) : 70%

Frequency (MHz) : 4 8 10 16 20 25 31.25 62.5 100 200 250 300 400 500
Attenuation (dB/100m) 3.8 5.3 5.9 7.5 8.4 9.4 10.5 15.0 19.1 27.6 31.1 34.3 40.1 45.3
NEXT (dB) 66.3 61.8 60.3 57.2 55.8 54.3 52.9 48.4 45.3 40.8 39.3 38.1 36.3 34.8
PS-NEXT (dB) 63.3 58.8 57.3 54.2 52.8 51.3 49.9 45.4 42.3 37.8 36.3 35.1 33.3 31.8
ELFEXT (dB) 56.0 49.9 48.0 43.9 42.0 40.0 38.1 32.1 28.0 22.0 20.0 18.5 16.0 14.0
PS-ELFEXT (dB) 53.0 46.9 45.0 40.9 39.0 37.0 35.1 29.1 25.0 29.0 17.0 15.5 13.0 11.0
Return Loss 23.0 24.5 25.0 25.0 25.0 24.3 23.6 21.5 20.1 18.0 17.3 17.3 17.3 17.3

Ordering and delivery information

Pair count P/N O.D [mm] Weight [kg/km] Packaging
4 pairs DCC6AFUTP4PV 7.5 53.0 305m / 1000ft box

Recommended connectivity

Keystone jack : KJ6ASTPNH / KJ6ASTPNY
RJ45 plug : RJ45S6APL231 / RJ45S6ABT231
Panel : PPE24SU
Patchcords : PCMJ6F series, PCMJ6S series
Faceplate : FP86150S245, FP86171S245

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


SCS6AS Cat.6A Patchcords Screened F/UTP 4 pairs PVC

Standards of reference and applications

EIA/TIA 568-C.2, ISO/IEC 11801, EN 50288-10, IEC 61156‐5, EN 50173-1
Gigabit Ethernet 10GBASE-T, Fast Ethernet 100 BASE-T, Fast Ethernet 100 BASE-TX, Ethernet 10 BASE-T, 155 Mbit ATM, 625 Mbit ATM, 1.2 Gbit ATM

 

Product Features

Category 6A Compliant, 500MHz
Backward Compatible
Choice of Colours
T568B wiring
Moulded strain relief boot with clip protector
Individually bagged

 

Installation Features

Store at  -0 to +60 °C
Install at  -0 to +50 °C
Operate at : -10 to +65 °C
Durability : > 700 Cycles (in/out)

 

Design

Cable conductor : stranded bare copper AWG26 /7×0.16mm)
Cable insulation : HDPE 0.98mm ± 0.06mm
Cable shield : overall aluminium foil with drain wire 7×0.16mm
Cable outer jacket : PVC material, nominal diameter 5.8mm
Cable marking : APS Finland – Category 6 F/UTP 4 pairs 26AWG Patch Cable  – 100Ohm — ISO/IEC 11801 TIA/EIA-568C.2-1 UL LISTED – m
Type of connector (end A) : PC Plug RJ45 8(8) screened, phosphor bronze contacts, gold plating.

Type of connector (end B) : PC Plug RJ45 8(8) screened, phosphor bronze contacts, gold plating.
Type of boot (end A) : moulded
Type of boot (end B) : moulded

Environmental properties and Fire Performances

Flame retardant :  IEC60332-1

 

Electrical characteristics

Dielectric strength : 1000V for 3 seconds
Voltage : 150V
Current : 
1.5A
Contact resistance :
≤ 20mΩ
Typical resistance unbalance : 2%
Insulation Resistance : min. 150 MΩ/km

 

Ordering and delivery information

P/N Packaging
PCMJ6Fxxc 1 pc/bag

xx = meter length (ex. 0,5m = 05; 1m = 1; 2m = 2; 10m = 10; …)
c = colours = Red (RD), Blue (BU), Black (BK), Green (GN), Yellow(YW), White (WT), Violet (VT), Orange (OR), Pink (PK).

 

Recommended connectivity

Horizontal cable : DCC6AFTP4PV, DCC6AFTP4PH, DCC6AFTP4PE
Keystone jack :
KJ6ASTPNH /  KJ6ASTPNY
Panel : PPE24SU
Faceplate : FP86150S245, FP86171S245

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


SCS6AS Keystone jack, STP Screened, Category 6A, Tool-less

Standards of reference and applications

Standards :  IEC60603-7-5, ISO/IEC 11801, IL/cUL Safety Standards, EIA/TIA 568b.2-1, EN 50173
Applications :  1000BASE‐T Gigabit Ethernet , 100BASE‐TX Fast Ethernet, 10 Base‐T Ethernet, 622Mbps ATM , 155Mbps ATM

 

Features

Standard RJ45 footprint
High quality die cast housing
Fast, easy, reliable termination
Clear IDC termination colour coding
Suitable for foil and braided screen cables
Suitable for 10 Gigabit Ethernet application
Wiring Specifications T568A & T568B
25 Years System Warranty

 

Installation Features

Store at  -40 to +70 °C
Install at  -0 to +50 °C
Operate at : -20 to +60 °C
Fitting : keystone jack

 

Design

Dimensions :  14.5 x 40.0 x 25.0 mm
Material :  cast alloy, lead frame
Holder and IDC block :  PC resin, UL94 V-O
Contacts and IDC terminal :  phosphor bronze
Conductor :  26-22 AWG
Insulation :  1.15mm
Connector type :  RJ45 8(8)
Connection type :  
insulation displacement
Round cable outer diameter :  5.0 – 9.0 mm
Flat cable outer diameter :  NO
Tool :  no tool
Cable tie :  1 pc
Pack :  24pc/bag – 504pcs/box

 

Ordering and delivery information

P/N Packaging
KJ6ASTPNY 10 pcs/bag

 

Recommended connectivity

Cable : DCC6AFTP4PV, DCC6AFTP4PH, DCC6AFTP4PE
Patch panel :
 PPE24SU
Patchcords : PCMJ6F series, PCMJ6S series
Faceplates : FP86150S245, FP86171S245

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

 


SCS6AS RJ45 plug, Field Terminable, screened, Category 6A, Tool-les

 

Standards of reference and applications

Standards :  ISO/IEC11801UL1863, ANSI/TIA-568-C.2
Applications :  1000BASE‐T Gigabit Ethernet , 100BASE‐TX Fast Ethernet, 10 Base‐T Ethernet, 622Mbps ATM , 155Mbps ATM

 

Features

Standard RJ45 footprint
High quality die cast housing
Fast, tool-less, reliable termination
Clear IDC termination colour coding
Suitable for foil and braided screened cables
Suitable for 10 Gigabit Ethernet application
Wiring Specifications T568A & T568B

Installation Features

Store at  -40 to +70 °C
Install at  -0 to +50 °C
Operate at : -20 to +60 °C
Fitting : RJ45 only

 

Design

Dimensions :  55.3mm (W) x 13.8mm (D) x 15.0mm (H)
Housing :  zinc alloy, fully shielded
IDC block :  PC resin, UL94 V-O
IDC :  phosphor bronze alloy, plated Sn alloy 100 micro-inch (100%)
Contacts pin :  phosphor bronze alloy, gold plated 50μm

Wir gauge :  26-23 AWG
Insulation :  1.15mm
Connector type :  RJ45 8(8)
Connection type :  
insulation displacement

Round cable outer diameter :  6.0 – 8.0 mm
Flat cable outer diameter :  NO
Tool :  no tool
Cable tie :  1 pc
Pack :  10pc/bag

 

Electrical characteristics

Insulation resistance :  500MΩ min. @ 100V DC
Max voltage :  1000V DC or AC (peak) 

Ordering and delivery information

P/N Packaging
PL45FT6ASNT 10 pcs/bag

 

Recommended connectivity

Cable : DCC6AFTP4P_, DCC6ASTP4P_, DCC6ASFP4P_
Patch panel :
 PPE24SU

Patchcords : PCMJ6F series, PCMJ6S series
Faceplates : FP86150S245, FP86171S245

 

 

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

 


SCS6AS Keystone jack, STP Screened, Category 6A, Tool-less, Butterfly style

Standards of reference and applications

Standards :  IEC60603-7-5, ISO/IEC 11801, IL/cUL Safety Standards, EIA/TIA 568b.2-1, EN 50173
Applications :  1000BASE‐T Gigabit Ethernet , 100BASE‐TX Fast Ethernet, 10 Base‐T Ethernet, 622Mbps ATM , 155Mbps ATM

 

Features

Standard RJ45 footprint
High quality die cast housing
Fast, easy, reliable termination
Clear IDC termination colour coding
Suitable for foil and braided screen cables
Suitable for 10 Gigabit Ethernet application
Wiring Specifications T568A & T568B
25 Years System Warranty

 

Installation Features

Store at  -40 to +70 °C
Install at  -0 to +50 °C
Operate at : -20 to +60 °C
Fitting : keystone jack

 

Design

Dimensions :  18.4 x 38.4 x 25.7 mm
Material :  cast alloy, lead frame
SCP :  SUS304
Holder :  PC resin, UL94 V-O
Contacts :  5100W phosphor bronze
IDC terminal :  phosphor bronze
IDC block :  PC resin, UL94 V-O
Conductor :  24-22 AWG
Insulation :  1.15mm
Connector type :  RJ45 8(8)
Connection type :  
insulation displacement
Round cable outer diameter :  5.0 – 9.0 mm
Flat cable outer diameter :  NO
Tool :  no tool
Cable tie :  1 pc

 

Ordering and delivery information

P/N Packaging
KJ6ASTPNH 10 pcs/bag

 

Recommended connectivity

Cable : DCC6AFTP4PV, DCC6AFTP4PH, DCC6AFTP4PE
Patch panel :
 PPE24SU
Patchcords : PCMJ6F series, PCMJ6S series
Faceplates : FP86150S245, FP86171S245

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.

 


SCSACC Single Gang Unloaded Face Plate with 2 x Keystone Jacks

Standards of reference and applications

 

Product Features

Flush mount
2 unloaded ports
Designed for Keystone Jacks

 

Installation Features

Store at  -0 to +60 °C
Install at  -0 to +50 °C
Operate at : -10 to +65 °C

 

Design

Material :
Colour  :  white
Height :  86mm
Width :  86mm
Type of fastening :  Screw
Outlet direction :  Straight
Shielded jacks:  yes
Shielded housing :  no
Surface mounted :  yes
Flush mounted (plaster) :  yes
With label space :  yes
Coloured ID :  yes


Ordering and delivery information

P/N Packaging
FP86171S245 1 pc/bag

 

Recommended connectivity

Keystone jack, unscreened : MJ6UK, MJ6UKTC
Keystone jack, unscreened :
KJ6ASTPNH,  KJ6ASTPNY

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.


SCSACC Single Gang Unloaded Face Plate with 2 x Keystone Jacks

Standards of reference and applications

 

Product Features

Flush mount
2 unloaded ports
Designed for Keystone Jacks

 

Installation Features

Store at  -0 to +60 °C
Install at  -0 to +50 °C
Operate at : -10 to +65 °C

 

Design

Material :
Colour  :  white
Height :  86mm
Width :  86mm
Type of fastening :  Screw
Outlet direction :  Straight
Shielded jacks:  yes
Shielded housing :  no
Surface mounted :  yes
Flush mounted (plaster) :  yes
With label space :  yes
Coloured ID :  no


Ordering and delivery information

P/N Packaging
FP86150S245 1 pc/bag

 

Recommended connectivity

Keystone jack, unscreened : MJ6UK, MJ6UKTC
Keystone jack, unscreened :
KJ6ASTPNH,  KJ6ASTPNY

 

Extended System Warranty

The APS System Warranty assures the compliance of the system performance to the applicable class of cabling for a period of 25 years. The warranty may be applied for by an accredited APS Partner who has designed and/or installed the entire system.

 

 

Every effort has been put so that this document is most reliable and free from errors. However, AP Solutions Oy cannot be considered responsible for any mistake in this document and users should consult AP Solutions Oy for any information needed. AP Solutions Oy reserves the right to make changes to the documents at any time, without prior notice.
AP Solutions Oy – www.aps-finland.fi – info@apsolutions.fi